Howdy everyone, I have the exciting pleasure of digging into my very first Porsche project car ever. Totally new to this chassis. I do have decades of automotive experience and owned my own classic BMW garage for some years, so I know my way around a car. I do have limited experience with total from scratch restorations. Having done a few BMW race cars, I know about stripping them down to a bare shell and putting them back together, but again without the finesse of a very valuable classic Porsche.
The car I have the pleasure of working with is a 1959 356A Coupe. It belonged to the owner since college and has been all across the country and has not been actually driven for at least 20-30 years. Back in the day he used to do time rally's, autocross, and some road racing with it. The current condition of the car is as such. A few years ago it was stripped down and painted and undercoated. There was some kind of disagreement and the car was returned and dropped off in the owners driveway and it has sat like this for the last 2-3 years.
In the process of stripping it down they neglected to strip the dash and paint with the rest of the car. The center console piece is still installed with stripped and rusty screws, you can see where they simply cut the carpet away. The undercoating appears to be sprayed on quite thoroughly. Unfortunately it is covering everything, the control arms, sway bar, swing arms, wiring, cables, grease fittings, steering box, master, brake lines, etc..even the clobs of grease squeezing out of the front torsion arm/link arms. Hopefully they actually repaired any rust damage as opposed to simply covering it over. There does not seem to be a major amount of rust that I can see visually. There is some rusting in areas of the center channel, some surface rust on trans mounts, etc.
I am not sure why such short cuts where taken, but I have to now go through and completely strip out everything and start from scratch, but at least it has a nice coat of paint. It seems to me that every last component is going to have to be removed, restored and/or replaced. The owner does have the financial power and motivation to complete the project to finish. I am hoping for less then a years time frame.
I am going to need guidance along the way for sure. I have already looked into a few books to get me started, but the owner says he has several, so I will see what he has first before I go and start buying books.
The engine was out of the car and supposedly in good condition, but after decades of storage, everything is pitted, corroded, surface rusted, etc..It will go up on a stand and get stripped to a long block and then carefully inspected via bore scopes through spark plug holes, sump cavity, intake and exhaust ports, etc. If all looks good then it will be a cosmetic overhaul.
I pulled the tranaxle assembly out last week. The drain plug magnet looked like margret simpsons beehive hairdo, there was less then a quart of molasses that drained out and a big slurry of grey mixed in. To say the least it will be going out for a overhaul, drivers side wheel bearing is missing several rollers and lots of cage fragments destroyed the seal, brake shoes soaked in gear oil.
Oh ya, ordered the complete wiring harness from y&z and should have that in a few weeks. All the wiring is brittle and cracking.
So anyways that is about where things stand at the moment. I will use this one thread as the project thread.
Here is how it sat just before I got it up on stands and pulled the trans.
New to the 356 scene, 1959 356A Coupe
-
- 356 Fan
- Posts: 2
- Joined: Fri Mar 10, 2017 12:37 am
- Mark Pribanic
- 356 Fan
- Posts: 2416
- Joined: Sun Mar 09, 2008 9:11 pm
- Tag: Drive 'Em!
- Location: Neptune Beach, Florida USA
- Contact:
Re: New to the 356 scene, 1959 356A Coupe
Welcome! You've come to the right place.
-Mark
-Mark
Mark Pribanic
Registry# 13617
Florida Owners Group Trustee - 2008-2010
Neptune Beach, Florida USA
Instagram: Mark.Pribanic
Registry# 13617
Florida Owners Group Trustee - 2008-2010
Neptune Beach, Florida USA
Instagram: Mark.Pribanic
- Doug McDonnell
- 356 Fan
- Posts: 6081
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: New to the 356 scene, 1959 356A Coupe
Welcome. A friend restored the 59 his dad bought in 61. Take your time to do it right. This forum is where you will get the help you need.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
-
- 356 Fan
- Posts: 4184
- Joined: Sun Apr 20, 2008 12:54 am
Re: New to the 356 scene, 1959 356A Coupe
Wow! Those carbs are the largest I've ever seen for a 356--definately not correct!
Dick
Dick
- Kathe Barnett
- 356 Fan
- Posts: 13
- Joined: Tue Feb 01, 2011 1:00 pm
Re: New to the 356 scene, 1959 356A Coupe
Wow. Same deal here. ruby Red 59. Just had engine tested. transaxle serviced. Looking to find correct seals and boots for rear body tunnel presently. Just got done blasting/ painting where driveline goes in.
All the knobs are missing, so looking for replacements.
Yours coming along?
All the knobs are missing, so looking for replacements.
Yours coming along?
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: New to the 356 scene, 1959 356A Coupe
Robert; welcome.
If those are Weber 48mm carbs, that's too much to be driveable.
If those are Weber 48mm carbs, that's too much to be driveable.
- Charles H Jacobus
- 356 Fan
- Posts: 493
- Joined: Wed May 28, 2014 5:02 pm
- Location: Dallas, TX
Re: New to the 356 scene, 1959 356A Coupe
Welcome to the forum, Robert. You have picked the right place for advice - I have never seen this much technical and historical expertise anywhere! I would love to know total cost when you are done. Mine was done in 2004 and they spent $60K (not counting the cost of the base car). It seems like parts prices have gone up significantly since then.
Chuck
Chuck
Current:
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
Re: New to the 356 scene, 1959 356A Coupe
Lotus and Morgan signs on the wall! Welcome, I have the same Weber setup on the shelf with the scat to Solex manifold adaptors, they came off a completion 912 engine. They look cool but I’ve never had anything to put them on.
Welcome Robert, you’re in for a lot of fun with this group.
Rusty
Welcome Robert, you’re in for a lot of fun with this group.
Rusty
Rusty