Page 1 of 1
Shifter disassembly
Posted: Sat Mar 24, 2018 8:00 pm
by Tim Menefee
Hi, I have a 59 A and am trying to replace the heater cables and it looks like I need to pull the shifter to access. I can't figure out how to pull the shifter. Any help would be appreciated.
Tim
Re: Shifter disassembly
Posted: Sat Mar 24, 2018 10:15 pm
by Spencer Harris
These are from the '56 workshop manual. There were multiple gearbox mods through the A series, but looking at the shop manual component photos I believe your '59 shift linkage should be very similar if not identical. The last photo is from the '57 parts manual.
Re: Shifter disassembly
Posted: Sun Mar 25, 2018 12:03 am
by Jim Clement
here is the tunnel that the shifter sits on.
mine is a T1.. if yours is a T2, the shifter will be sit infront of the heater cable housing.
Re: Shifter disassembly
Posted: Sun Mar 25, 2018 6:06 pm
by Tim Menefee
Thanks guys...