It is currently Mon Aug 20, 2018 8:56 am

All times are UTC - 5 hours [ DST ]


Forum rules


Please click here to view the forum rules



Post new topic Reply to topic  [ 6 posts ] 

Where should I source replacement panels from?
All Zim - Simonsen 356 Panels 0%  0%  [ 0 ]
Stoddard 33%  33%  [ 1 ]
Restoration Design 67%  67%  [ 2 ]
Sierra Madre Collection 0%  0%  [ 0 ]
Other 0%  0%  [ 0 ]
Total votes : 3
Author Message
PostPosted: Mon Jan 29, 2018 11:18 pm 
356 Fan
User avatar

Joined: Sat Jun 18, 2016 9:13 am
Posts: 8
Location: Bogota, Colombia
Hey everyone,

I am about to purchase parts to begin restoring my 62' S90. The car needs floor replacement and probably the jack spurs. With the floor pans the seat mounts should be replaced as well. So far so good, but even after doing my homework and reading a couple of articles and the particular section on this subject in Ron Roland's book, I'm not sure if I should replace any other parts.

Front and rear wheel well braces are in bad shape as well as the diagonal cross member. Other than that the car is in good shape. Any special recommendations of any other parts that should be replaced?

After doing some research, I've looked for the parts and due to the huge difference in prices I am a little confused. Would really appreciate it if someone could give me some feedback on the quality of each supplier.

Options I've seen:

Restoration Design has the least expensive parts by far! (deluxe floor kit for 450.00)
Stoddard is offering a good deal on a kit (floor pans, seat mounts, jack spurs and perimeter kit (750.00)
Torsten Waldorf / Simonsen 356 panels (These are sold on All Zim's store)
Sierra Madre (don't know where they source their panels, but are a bit expensive)
AASESales - Looks like they source from Restoration Design

I read a post where Mike from RD, Bruce from Stoddard and Al Zim all contributed. Apparently differences are not that big and both Stoddard and RD offer Galvaneal floor pans, so I guess that due to my limited budget I will be buying from RD. If anyone's got another piece of advice on this matter I will be very thankful!

Best,

Pablo


Top
 Profile  
Reply with quote  
PostPosted: Tue Jan 30, 2018 10:13 am 
356 Fan

Joined: Wed Mar 26, 2008 4:47 pm
Posts: 325
Outside rockers; last week I dropped of a C to Dave Miller to finish work on the body. The first thing he did was straight edge my rockers and found them to be flat ( Stoddard ), he thought zim might have the correct rocker with a bit of a curve. Just thought if you are buying you might ask the supplier.
Rusty

_________________

Rusty



Top
 Profile  
Reply with quote  
PostPosted: Tue Jan 30, 2018 10:19 am 
356 Fan
User avatar

Joined: Tue Mar 25, 2008 5:34 pm
Posts: 1622
The reality is that there are big differences in the quality of the replacement panels out there. There is not one to go to source. I have to say that RD and Simonsen put in the biggest effort to make their panels as close to original as possible. They would be my first stop.

I am in the midst of doing a '56 coupe and my metal surgeon is using panels from Simonsen, RD and others. We select a different vendor for each panel based on who has the best fitting and most authentic piece.

_________________
'56 Coupe
'57 Coupe
'59 CabĀ 
'60 Coupe


Top
 Profile  
Reply with quote  
PostPosted: Tue Jan 30, 2018 12:36 pm 
356 Fan

Joined: Thu Feb 23, 2017 12:41 am
Posts: 157
Location: Radondo So Cal
Palbo, Have you met Juan Badel in Bogota. I've been following him on facebook.
Every car he builds is getting better.

https://petrolicious.com/articles/this- ... n-colombia


Top
 Profile  
Reply with quote  
PostPosted: Tue Jan 30, 2018 9:48 pm 
356 Fan
User avatar

Joined: Sat Jun 18, 2016 9:13 am
Posts: 8
Location: Bogota, Colombia
Guys thank you for the feedback.

As I only need floorpans and longitudinals, I'm pretty sure I'm going to go with RD due to their pricing.

Martin, yes actually Juan and I are good friends. He's pursuing a very interesting project right now! Follow him on instagram as well, his account is @estudiobadel or something like that.

Great guy, lives in a couple hours away from Bogota and does everything himself. Really looking forward to seeing the results of his latest project!


Last edited by Pablo Esguerra on Mon Jul 16, 2018 7:32 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: Sun Mar 18, 2018 10:40 am 
356 Fan

Joined: Mon Jan 23, 2017 11:53 am
Posts: 9
Location: southwest florida
I'm in the middle of restoring a 64 coupe, starting a 61 roadster. My garage is full of parts that are not up to quality. What I've found you can get a great part from whoever and when you order the next phase part its crap. What we need is to compare specific parts thru the various vendors. It would save a restorer a lot of money and hassle. Often its not worth returning the part with freight and restocking fees. I now spend more time calling the vendors trying to find out where their part came from and so on, generally its not successful. The end result is you order it, pay 20-25% freight and see. I have hanging on my wall 2 sets of longitudinals that are 21 gauge, I found 18 guage instead. So it goes on and on. Like I said it would be nice to compare special pieces from various suppliers.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group