It is currently Wed Jan 17, 2018 2:59 am

All times are UTC - 5 hours [ DST ]


Forum rules


Please click here to view the forum rules



Post new topic Reply to topic  [ 28 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Sat Dec 30, 2017 1:08 pm 
356 Fan

Joined: Sun Dec 10, 2017 10:38 am
Posts: 12
Location: Italy
That's not good for originality, but could happen on vintage cars.
It could affect and compromise the regular functionality of the engine?
Which impact could have on the value of the project?

Thanks.


Top
 Profile  
Reply with quote  
PostPosted: Sat Dec 30, 2017 2:37 pm 
356 Fan
User avatar

Joined: Wed Aug 27, 2008 10:54 am
Posts: 1848
Location: Alpine AZ, Green Valley AZ
Not sure about the impact on the value of the project. The engine is basically the same as the original SC engine. If someone had put a much older engine in the car, it wouldn't be as good however. If your intention is to restore the car to a fine condition and to enjoy driving it, the engine will suit the purpose. If your sole intent is to make it exactly as it came from the factory, that is no longer possible. You might try to check back through previous owners and try to find out what happened to the original crankcase. You have the third piece (the timing cover) which has the original serial number, so that number of engine shouldn't exist elsewhere.

_________________
Some days it just isn’t worth the hassle of chewing through the restraints......


Top
 Profile  
Reply with quote  
PostPosted: Sat Dec 30, 2017 3:17 pm 
356 Fan

Joined: Sun Dec 10, 2017 10:38 am
Posts: 12
Location: Italy
Many thanks, I would restore to originality as much as possible, but not at concours level as I like to use it in my traveling. But a 912 case, will have some differences, i.e. the flap heat box are not exactly the SC model and so on. This will be a pity. Any chance to find an SC correct missed parts?


Top
 Profile  
Reply with quote  
PostPosted: Sat Dec 30, 2017 3:40 pm 
356 Fan
User avatar

Joined: Wed Aug 27, 2008 10:54 am
Posts: 1848
Location: Alpine AZ, Green Valley AZ
That 912 case probably has the SC /C flapper boxes if it was installed in the car when you got it. If the job was done correctly, they would have reused the original SC external bits.

_________________
Some days it just isn’t worth the hassle of chewing through the restraints......


Top
 Profile  
Reply with quote  
PostPosted: Sat Dec 30, 2017 4:00 pm 
356 Fan

Joined: Sun Dec 10, 2017 10:38 am
Posts: 12
Location: Italy
Unfortunately we have here the cooling box of a 912 (no thermostat holes) and the flapper boxes have only one flap... That's not a good start for the new year and the project. But the car deserve a quality restoration anyway. I think I will need some helps from you experts on how sorting the problem. Any suggestion is welcome.


Top
 Profile  
Reply with quote  
PostPosted: Sun Dec 31, 2017 6:56 am 
356 Fan
User avatar

Joined: Wed Mar 26, 2008 10:55 am
Posts: 812
Location: UK
Tag: Its Only for Fun
Quote:
I see the rare electric windshield washer listed for your car in the Vindb. Very rare.


The Switch for this option is special - Check that you have the correct one
When you pull on the switch it will click and lock - this is the on/off Function

You should then be able to pull on the switch again - This pull is against a Spring Return Action and when held out against the Spring - This operates the Electric Washer Pump

_________________
Mike Smith (Essex - UK)


Top
 Profile  
Reply with quote  
PostPosted: Sun Dec 31, 2017 8:35 am 
356 Registry Member
User avatar

Joined: Tue Oct 27, 2009 5:02 pm
Posts: 6118
Location: SE Michigan
One other item about the 912 engine case; the lower engine mounting studs are longer, and sometimes the nut stops on the un-threaded part of the stud and does not permit proper tightening of the engine.

_________________


Top
 Profile  
Reply with quote  
PostPosted: Sun Dec 31, 2017 1:44 pm 
356 Fan
User avatar

Joined: Wed Aug 27, 2008 10:54 am
Posts: 1848
Location: Alpine AZ, Green Valley AZ
Maurizio sent me the following questions which I thought best answered here. Hopefully others will chime in with their thoughts. As I explained to Maurizio, I don't consider myself an expert on these engines. There are many on this forum with much more knowledge than I.

1. The 2/3 of the original engine body are gone in past era. The 912 parts
are the replacement of a seriously broken engine? Probably yes.

Answer: You are probably correct. We don't know exactly what happened to the original engine,
but it was probably easier to source a new crankcase than repair the old one. The 912 and SC crankcases were virtually identical, with the exception of the numbers. By reusing the third piece, the original engine serial number was retained.

2. If properly installed, will the engine will run fine? Seems yes.

Answer: If it was rebuilt properly and is installed properly, yes.

3. Are there any issues or details that should be incompatible or modified
to have the 912 parts work as an SC engine?

Answer: The basic case halves should work without change, except as Vic has noted that the lower mount studs (that go through the bell housing) might be a little too long. Adding a washer or two to make sure the nuts don't reach the end of the threads would easily solve that issue. On the other hand, the ancillary parts that you have may not be correct for an engine with the European heater system. (You indicated earlier that you thought the heater boxes were for a 912. Is it possible that they are for the European heater system?)

4. Reinhold suggest to ask you if you have a database of production numbers
punched, and help us in finding one compatible with the engine # so we can
at least try to giving a chance to looks at it should.

Answer: We know that SC engines with the European heater system had serial numbers in the range of P820001 - P821855. The serial number on your third piece, P820459, indicates that it would have been installed in a car late in 1963 or early in 1964. Finding an SC engine with a serial number close to your number of P820459 might yield a case with the engine assembly number CLOSE to what should be in your car, but it would still not be exactly correct. As far as I know, the factory did not keep a record of engine assembly numbers. It may not be worth the effort or expense of trying to find something close to what should be in the car.

I hope that answers your questions and that we get more responses to your questions.

Cheers,
Wes

_________________
Some days it just isn’t worth the hassle of chewing through the restraints......


Top
 Profile  
Reply with quote  
PostPosted: Sun Dec 31, 2017 2:07 pm 
356 Fan
User avatar

Joined: Wed Aug 27, 2008 10:54 am
Posts: 1848
Location: Alpine AZ, Green Valley AZ
To further clarify your engine assembly number Maurizio:

Although the factory didn't list engine assembly numbers, Harry Pellow tried to get members to send him information on their engines. He called them casting numbers. He compiled these and put them in some of his books. Your engine assembly number, 114721, is between 114676 (which Harry says is the highest number in his 616/39 engine range) and 114967 (which he says is the lowest number in his 616/40 engine range).

_________________
Some days it just isn’t worth the hassle of chewing through the restraints......


Top
 Profile  
Reply with quote  
PostPosted: Sun Dec 31, 2017 2:20 pm 
356 Registry Member
User avatar

Joined: Tue Oct 27, 2009 5:02 pm
Posts: 6118
Location: SE Michigan
I have an old list from Pellow. Seems that the assembly numbers were all over the map in regard to engine serial numbers.
Best I can figure out, your 820459 might have had an assembly number anywhere from 84165 up to 86896; maybe.
Good luck.

_________________


Top
 Profile  
Reply with quote  
PostPosted: Sun Dec 31, 2017 7:21 pm 
356 Fan
User avatar

Joined: Sat Apr 05, 2008 8:21 am
Posts: 2695
Location: Augusta,Michigan
Dual flapper boxes would be correct. 912 boxes can be modified to work. Sounds like yo7 have what I call a bitsa motor. Bits from this bits from that. https://porsche356registry.org/classifieds/18668 is the setup you need.

_________________
1965 356C and 1965 C Outlaw


Top
 Profile  
Reply with quote  
PostPosted: Mon Jan 01, 2018 10:18 am 
356 Fan
User avatar

Joined: Wed Aug 27, 2008 10:54 am
Posts: 1848
Location: Alpine AZ, Green Valley AZ
Actually, Doug, I think that the European style of boxes would be correct (as original). The serial number of the original engine in the car indicates that it had the European heater option. When the 912 crankcase halves were substituted for the original ones, we don't know if there was any attempt at keeping that heater option. The fan housing doesn't appear to have the snout that the European heater would have used. Maybe it became a "bitsa" engine at that point.

(Am I correct in assuming that there were possibly three variations in heater boxes? Stock SC, stock 912 and European heater? A photo of the boxes on his car would help.)

In any case, it would appear that Maurizio has all the makings of a very nice, well appointed car. So what if the crankcase had to be replaced at some point in its life? That's all a part of the car's history.

_________________
Some days it just isn’t worth the hassle of chewing through the restraints......


Top
 Profile  
Reply with quote  
PostPosted: Mon Jan 01, 2018 11:46 am 
356 Fan
User avatar

Joined: Sat Apr 05, 2008 8:21 am
Posts: 2695
Location: Augusta,Michigan
Yes Wes the fan housing he has is for USA heater system. That is why I mentioned dual flapper 356 or modifying 912 flapper boxes. Euro heat system would be way too expensive if parts could be found I think.

_________________
1965 356C and 1965 C Outlaw


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group