61 cab gas pedal throttle lever

Share progress on your 356 related project or full restoration with others!
Post Reply
Message
Author
Paul Spurgas
356 Fan
Posts: 17
Joined: Sat Dec 17, 2011 1:00 am

61 cab gas pedal throttle lever

#1 Post by Paul Spurgas » Tue Oct 10, 2017 12:33 am

I need some help, pics hopefully, that show how the throttle lever fits into the left pedal board supports. There must be a bushing or pivot that I'm missing. I've seen many pics on line but I'm not sure what is missing.
Thank you

Paul Spurgas
356 Fan
Posts: 17
Joined: Sat Dec 17, 2011 1:00 am

Re: 61 cab gas pedal throttle lever

#2 Post by Paul Spurgas » Tue Oct 10, 2017 2:23 pm

I finally discovered the part. Bearing plate 644.23.128 now just have to find one.

User avatar
Doug McDonnell
356 Fan
Posts: 3452
Joined: Sat Apr 05, 2008 8:21 am
Location: Augusta,Michigan

Re: 61 cab gas pedal throttle lever

#3 Post by Doug McDonnell » Tue Oct 10, 2017 2:29 pm

maybe this schematic will help?
Attachments
3b48bb0e34609322b32c0eb41eba7cce.jpg
1965 356C There is never enough time to do it right, but always enough time to do it over.

User avatar
Doug McDonnell
356 Fan
Posts: 3452
Joined: Sat Apr 05, 2008 8:21 am
Location: Augusta,Michigan

Re: 61 cab gas pedal throttle lever

#4 Post by Doug McDonnell » Tue Oct 10, 2017 2:57 pm

Paul a picture of what you do have would help. Or maybe you need a new pedal assembly: http://www.stoddard.com/64423011-nla.html
1965 356C There is never enough time to do it right, but always enough time to do it over.

Paul Spurgas
356 Fan
Posts: 17
Joined: Sat Dec 17, 2011 1:00 am

Re: 61 cab gas pedal throttle lever

#5 Post by Paul Spurgas » Tue Oct 10, 2017 5:25 pm

I have a new pedal assembly. The car was a shell with most replaced with Trevor's metal. Either the bearing plate wasn't there or was removed when the new metal parts were installed. The part I'm missing is the bearing plate. I'll have to find a used one since I can't find a new one from the normal sources. I got the car from Adam a while back and my memory isn't as good as it was then. He has helped me a lot sourcing parts and may have the part.
After several years the metal is new and the car has been painted and looks great. The hard part is finding all those little things that actually will make it run.
Thanks

User avatar
Doug McDonnell
356 Fan
Posts: 3452
Joined: Sat Apr 05, 2008 8:21 am
Location: Augusta,Michigan

Re: 61 cab gas pedal throttle lever

#6 Post by Doug McDonnell » Tue Oct 10, 2017 5:31 pm

The gas pedal assembly mounts to the toe board mount which has captured nuts: http://www.stoddard.com/64450107000-nla.html
Attachments
DSC_1580.jpg
DSC_1580.jpg (62.89 KiB) Viewed 1063 times
1965 356C There is never enough time to do it right, but always enough time to do it over.

Brad Ripley
356 Fan
Posts: 3362
Joined: Tue Mar 25, 2008 9:28 pm

Re: 61 cab gas pedal throttle lever

#7 Post by Brad Ripley » Wed Oct 11, 2017 1:49 am

See Ebay
152476116909
152464609144
152464608612
302473556583
152453582604
162398886098
and a few more. Maybe call Jim B.

User avatar
Doug McDonnell
356 Fan
Posts: 3452
Joined: Sat Apr 05, 2008 8:21 am
Location: Augusta,Michigan

Re: 61 cab gas pedal throttle lever

#8 Post by Doug McDonnell » Wed Oct 11, 2017 12:02 pm

Thank you Brad
1965 356C There is never enough time to do it right, but always enough time to do it over.

Paul Spurgas
356 Fan
Posts: 17
Joined: Sat Dec 17, 2011 1:00 am

Re: 61 cab gas pedal throttle lever

#9 Post by Paul Spurgas » Wed Oct 11, 2017 12:12 pm

Thank you Brad.

Post Reply