The Official 356Talk Forum

I need some help, pics hopefully, that show how the throttle lever fits into the left pedal board supports. There must be a bushing or pivot that I'm missing. I've seen many pics on line but I'm not sure what is missing.
Thank you

I finally discovered the part. Bearing plate 644.23.128 now just have to find one.

maybe this schematic will help?

Paul a picture of what you do have would help. Or maybe you need a new pedal assembly: http://www.stoddard.com/64423011-nla.html

I have a new pedal assembly. The car was a shell with most replaced with Trevor's metal. Either the bearing plate wasn't there or was removed when the new metal parts were installed. The part I'm missing is the bearing plate. I'll have to find a used one since I can't find a new one from the normal sources. I got the car from Adam a while back and my memory isn't as good as it was then. He has helped me a lot sourcing parts and may have the part.
After several years the metal is new and the car has been painted and looks great. The hard part is finding all those little things that actually will make it run.
Thanks

The gas pedal assembly mounts to the toe board mount which has captured nuts: http://www.stoddard.com/64450107000-nla.html

See Ebay
152476116909
152464609144
152464608612
302473556583
152453582604
162398886098
and a few more. Maybe call Jim B.

Thank you Brad

Thank you Brad.