welder in SF Bay Area

Share progress on your 356 related project or full restoration with others!
Post Reply
Message
Author
Paul Perdue
356 Fan
Posts: 9
Joined: Mon Apr 14, 2008 1:11 am

welder in SF Bay Area

#1 Post by Paul Perdue »

A friend is about to start a restoration of a cabriolet. He needs to have a new floor pan, but is unable to find a welder willing to take on the job. The car currently is in San Francisco, with the engine out of the car. Any suggestions?
Paul Perdue

User avatar
Greg Bryan
356 Fan
Posts: 3692
Joined: Sat Oct 04, 2008 1:05 pm
Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
Contact:

Re: welder in SF Bay Area

#2 Post by Greg Bryan »

If you attended one of Jim B's of EASY Saturday morning gatherings, you will get lots of suggestions. I believe they are every other week, so check with Jim for the schedule.
Good luck!
Greg Bryan

Paul Perdue
356 Fan
Posts: 9
Joined: Mon Apr 14, 2008 1:11 am

Re: welder in SF Bay Area

#3 Post by Paul Perdue »

Greg:

Thanks. I will check with "Saint" Jim.
Paul Perdue

Post Reply