Dual Master Cylinder

Share progress on your 356 related project or full restoration with others!
Post Reply
Message
Author
User avatar
Victor Ingram
356 Fan
Posts: 670
Joined: Tue Nov 04, 2008 12:05 pm

Dual Master Cylinder

#1 Post by Victor Ingram »

I am thinking about installing a dual master cylinder in my pre-a. I am looking for some insight.
Thanks

User avatar
George Nostrant
356 Fan
Posts: 53
Joined: Mon May 05, 2008 12:30 am

Re: Dual Master Cylinder

#2 Post by George Nostrant »

Check out Pelican Parts website, they mAy have tech article on installing the dual master cylinder in 356 cars.

M Penta
356 Fan
Posts: 753
Joined: Tue May 31, 2011 10:07 pm
Location: VT

Re: Dual Master Cylinder

#3 Post by M Penta »

http://www.google.com/url?sa=t&rct=j&q= ... w92L6RyvXg

Hi Victor,

Here is a thread on this subject, there are several others as well. It is a straight forward job, the only area where you may wish to get creative is with the mounting of the new reservoir. I chose to retain the dual outlet reservoir that came with the kit, raising it up a bit in stock location so that both lines can exit through the hole under reservoir.

Mark

Post Reply