It is currently Thu Aug 16, 2018 11:54 pm

All times are UTC - 5 hours [ DST ]


Forum rules


Please click here to view the forum rules



Post new topic Reply to topic  [ 53 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
PostPosted: Mon Dec 11, 2017 8:08 pm 
356 Fan
User avatar

Joined: Mon Nov 24, 2014 12:58 pm
Posts: 46
Location: Vacaville, Ca
Well now I am well into this project. Metal work is done and waiting for Paint. Engine is in the process of the build. Walt from Competition Engineering worked all the kinks out of the engine. Crank case rebuild with a ton of work. Welding cracks, straightening out the crank bore, shaving the halves and line boring. Crank magnafluxed, ground, hardened, heads reworked with new and larger intake valves, new seats, new guides, etc. New cam, new followers, new rods, balanced throughout, re-surfaced flywheel, and more. Have finished the lower end, following all the Harry Pellow advice I never did when the engine was last rebuilt in the 70s. I may not end up with a broken crank this time...........


Attachments:
File comment: Crank ready
0T0A0657.JPG
0T0A0657.JPG [ 23.65 KiB | Viewed 976 times ]
File comment: All surfaces gooped with Moly and special sauce. Ready to drop the crank
0T0A0653.JPG
0T0A0653.JPG [ 24.23 KiB | Viewed 976 times ]
File comment: Applying Harry's special mystery sauce
0T0A0647.JPG
0T0A0647.JPG [ 25.07 KiB | Viewed 976 times ]
File comment: making sure all oil passages are open
0T0A0645.JPG
0T0A0645.JPG [ 22.79 KiB | Viewed 976 times ]
File comment: Installing the timing gear, spacer, distributor drive gear. A convection oven on the counter behind me. Slid right on.
0T0A0642.JPG
0T0A0642.JPG [ 26.17 KiB | Viewed 976 times ]
File comment: Document the engine build date. Engine is matching.
0T0A0635.JPG
0T0A0635.JPG [ 16.86 KiB | Viewed 976 times ]
File comment: torquing the rods. Don't forget the locktite
0T0A0631.JPG
0T0A0631.JPG [ 27.33 KiB | Viewed 976 times ]
File comment: Parts back from Competition Engineering. thanks Walt!
0T0A0605.JPG
0T0A0605.JPG [ 24.84 KiB | Viewed 976 times ]
File comment: parts back from the zinc plater
0T0A0596.JPG
0T0A0596.JPG [ 154.43 KiB | Viewed 976 times ]
0T0A0586.JPG
0T0A0586.JPG [ 199.12 KiB | Viewed 976 times ]

_________________
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
Vacaville Ca.
Top
 Profile  
Reply with quote  
PostPosted: Mon Dec 11, 2017 8:13 pm 
356 Fan
User avatar

Joined: Mon Nov 24, 2014 12:58 pm
Posts: 46
Location: Vacaville, Ca
Continuing the engine build


Attachments:
File comment: Case is done. More pics in a couple days
0T0A0679.JPG
0T0A0679.JPG [ 23.09 KiB | Viewed 976 times ]
File comment: Correct bolts
0T0A0676.JPG
0T0A0676.JPG [ 19.19 KiB | Viewed 976 times ]
File comment: torquing the acorn case bolts. Yes, the seals and correct washers with bevel toward seal.
0T0A0672.JPG
0T0A0672.JPG [ 25.47 KiB | Viewed 976 times ]
File comment: Timing varified
0T0A0664.JPG
0T0A0664.JPG [ 21.84 KiB | Viewed 976 times ]

_________________
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
Vacaville Ca.
Top
 Profile  
Reply with quote  
PostPosted: Mon Dec 11, 2017 8:23 pm 
356 Fan
User avatar

Joined: Mon Nov 24, 2014 12:58 pm
Posts: 46
Location: Vacaville, Ca
My metal man, John Holden, in Shingles Springs, advised me that he has had a stroke. He is OK, kind of...It did cause him some damage and he is not "back to 100%". He wanted me to know that all of his projects, concerning Porsche restorations, are now on hold for the foreseeable future. I am concerned but plan on sticking with John until more time for healing is allowed and a direction for his restoration side is known. In the meantime, do any of you have any suggestions for quality body work. Actually, the body work is done, now paint prep, painting and undersealing.
Any suggestions. I am not planning a move just now but need to get my alternative plan together.

_________________
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
Vacaville Ca.


Top
 Profile  
Reply with quote  
PostPosted: Fri Jan 12, 2018 5:54 pm 
356 Fan

Joined: Sat Feb 04, 2012 11:49 am
Posts: 2
David

Before you move forward, talk to Brandon at Altissimo in Napa (close to American Canyon) Just a hop skip and a jump from you. I know he is busy right now, but he is a great guy, and just did a great job on my roadster. My roadster was also originally Condor Yellow, but after buying a quart and spraying it out (in 1988) I decided I didn't like it. I have some old single stage PPG condor yellow that may still be alive if you want to do a test (only one quart). If you have any overspray on your door hinge covers, that the place for a match.

I did the body prep and priming myself. I was about to paint the car myself in my garage, but fortunately, I ran into a post on this forum recommending his shop, and am I very thankful. If I did it again, I would have him do the prep and priming, as his shop turns out really beautiful cars, and he is really honest and efficient in his work. This year he had a couple 356's on the grass at the rennsport reunion, and he usually has a 356 or two in his shop. He sprayed on two part Spies Hecker, and it turned out great. I can't recommend him highly enough.
My car is now Signal red, which is what I have always wanted. Its not going to be for sale, it's going to be driven. Putting the charcoal carpeting in now.

Neil

_________________
 


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 05, 2018 1:38 pm 
356 Fan
User avatar

Joined: Mon Nov 24, 2014 12:58 pm
Posts: 46
Location: Vacaville, Ca
HELP! My body guy, John Holden, has completely tooled down since a stroke a few months ago. He has asked me to pick-up my car. The car is about 90% done in the metal stage. Does anyone know of a high quality body/paint shop in the Northern California area. I dread carting it down to the south......
Thanks for any ideas.

_________________
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
Vacaville Ca.


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 12, 2018 1:01 pm 
356 Fan
User avatar

Joined: Mon Nov 24, 2014 12:58 pm
Posts: 46
Location: Vacaville, Ca
HELP...I heard there is a metal man in Placerville, first name Lance. Anyone know of such a person?

_________________
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
Vacaville Ca.


Top
 Profile  
Reply with quote  
PostPosted: Wed Mar 28, 2018 2:14 pm 
356 Fan
User avatar

Joined: Mon Nov 24, 2014 12:58 pm
Posts: 46
Location: Vacaville, Ca
OK, I found a fellow that is willing to take on the notch. Moving it next week. Should be ready for assembly by November. Finishing up the engine. Sheet metal back from powder coating. Waiting for one piece, lost in the years since engine was disassembled. Have made a tool to remove the steering arm from the steering box. Will include pictures soon.


Attachments:
IMG_1526.JPG
IMG_1526.JPG [ 490.34 KiB | Viewed 503 times ]
IMG_1528.JPG
IMG_1528.JPG [ 349.48 KiB | Viewed 503 times ]
IMG_1530.JPG
IMG_1530.JPG [ 357.17 KiB | Viewed 503 times ]
20180328_112151.jpg
20180328_112151.jpg [ 290.95 KiB | Viewed 534 times ]
File comment: Tool to remobe pitman arm
20180328_112202.jpg
20180328_112202.jpg [ 283.65 KiB | Viewed 534 times ]
20180328_112215.jpg
20180328_112215.jpg [ 333.13 KiB | Viewed 534 times ]
20180328_112226.jpg
20180328_112226.jpg [ 366.71 KiB | Viewed 534 times ]
File comment: the missing piece. Walt at Competition Engineering is sending one. Great guy!
dipstickmetal.jpg
dipstickmetal.jpg [ 3.76 KiB | Viewed 537 times ]

_________________
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
Vacaville Ca.
Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 29, 2018 2:24 pm 
356 Fan
User avatar

Joined: Mon Nov 24, 2014 12:58 pm
Posts: 46
Location: Vacaville, Ca
About ready to start notch normal engine on run up stand. The engine is 1720cc, lightened S90 flywheel, 40mm intake valves, ported and matched, 912 rods, 83.5 JE pistons in bored cast iron cylinders, All balanced, new cam with street grind, new oil pump gears, timing gears. Just a nicely updated normal engine. Should work well. All machine work by Walt at Competition Engineering. Waiting for a new exhaust system to arrive.

_________________
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
Vacaville Ca.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 53 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group