WCSTA -25- 10164Three pieces
- Trevor Gates
- 356 Fan
- Posts: 1094
- Joined: Thu Dec 10, 2009 6:52 pm
- Location: San Clemente, CA
B brakes, gast tank and VDO sender
Summer has come and gone, no beach day this weekend because it was raining. I spent all my free time this summer cruising in my Caddy, but I have been on the hunt for parts. Scored these "B" drums as well an original gas tank and VDO sender. The cool thing is that I didn't know the date stamp on the tank or sender until I received them in person from the guy who shipped them to me, it turns out they are date stamped 10/57 and 12/57, same year as my car. It was a nice unexpected bonus. I've started to take my Caddy apart and am welding away on that to get it ready for paint. Hopefully done in a month and then more time to tackle the Porsche.
https://www.instagram.com/trevorcgates/
-
- 356 Fan
- Posts: 907
- Joined: Mon Aug 25, 2008 6:45 pm
- Contact:
Re: 10164Three pieces
Nice find Trevor! Are you still missing most of the parts for this car? Chrome trim etc.
Justin
Justin
- Trevor Gates
- 356 Fan
- Posts: 1094
- Joined: Thu Dec 10, 2009 6:52 pm
- Location: San Clemente, CA
Re: 10164Three pieces
Depends on your definition of most Justin I do have the front window frames, but not the back however I may go with plexiglass anyway. I have the one year only 57 ignition switch, and a bunch of other odds and ends that came with the car and some I've been collecting. I do have to buy all new suspension in the front, the whole interior (trying to justify the cost of the repro speedster seats from Zims/Simonsen) and of course the engine and trans. When I get further along with welding I'll probably start putting up some wanted ads for the stuff I can't find from Stoddard or out there on the market as used.
I'm dying to see you do some more work on your Polo motor...
I'm dying to see you do some more work on your Polo motor...
https://www.instagram.com/trevorcgates/
- Jim Karaba
- 356 Fan
- Posts: 1027
- Joined: Sun Feb 22, 2009 12:34 am
- Location: Lafayette, LA
Re: 10164Three pieces
I see Zims seats are priced at 1200 each. Wow that is a lot. I am sure they are nice too, but when I was restoring the last speedster we bought repro seats from Trevor hammer works. His seats cost us 750 a piece and they were very nice. We had them powder coated black before sending them to AutosInternational. I just checked and they have gone up in price to 875.00 each.
- Trevor Gates
- 356 Fan
- Posts: 1094
- Joined: Thu Dec 10, 2009 6:52 pm
- Location: San Clemente, CA
-
- 356 Fan
- Posts: 507
- Joined: Thu Apr 03, 2008 12:29 pm
- Location: New Mexico
Re: 10164Three pieces
Trevor,
I'm fascinated by this project of the three piece car! and also the rolling cage.
I also bought a set of Trevor's speedster seat shells and was very pleased.
DG
I'm fascinated by this project of the three piece car! and also the rolling cage.
I also bought a set of Trevor's speedster seat shells and was very pleased.
DG
David Gensler
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
- Trevor Gates
- 356 Fan
- Posts: 1094
- Joined: Thu Dec 10, 2009 6:52 pm
- Location: San Clemente, CA
Re: 10164Three pieces
David - Thanks! I'm pretty fascinated by it also. How is your 58? I put the link to your build, just in case others haven't seen it. There is so much useful info in there: http://porsche356registry.org/356talk/4/20706.html
Greg - Congratulations on your new role as moderator. I'm sure Chris welcomes the help, he's been over worked for quite awhile now.
As far as updates, the 356 has been sleeping. I have been cutting my teeth so to speak, by TIG welding on my Caddy. My goal for 2012 was to get the 356 in one piece and build the rotisserie. My goal for 2013 is to finish all the metal work that I am capable of doing.
Greg - Congratulations on your new role as moderator. I'm sure Chris welcomes the help, he's been over worked for quite awhile now.
As far as updates, the 356 has been sleeping. I have been cutting my teeth so to speak, by TIG welding on my Caddy. My goal for 2012 was to get the 356 in one piece and build the rotisserie. My goal for 2013 is to finish all the metal work that I am capable of doing.
https://www.instagram.com/trevorcgates/
- Andrew Serdich
- 356 Fan
- Posts: 145
- Joined: Fri Aug 24, 2012 10:21 am
- Tag: Enjoying the ride
- Location: Coatesville, PA
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: 10164Three pieces
Trevor is entering his car in the We Can Save Them All contest
Good luck!
Good luck!
Greg Bryan
- Trevor Gates
- 356 Fan
- Posts: 1094
- Joined: Thu Dec 10, 2009 6:52 pm
- Location: San Clemente, CA
Re: WCSTA -25- 10164Three pieces
Thanks Greg. I'm chipping away at it.
Here are some pics of the engine bay rust I've cut out and a new piece that I fab'd and cleco'd in to get ready for the TIG.
Here are some pics of the engine bay rust I've cut out and a new piece that I fab'd and cleco'd in to get ready for the TIG.
https://www.instagram.com/trevorcgates/
- Trevor Gates
- 356 Fan
- Posts: 1094
- Joined: Thu Dec 10, 2009 6:52 pm
- Location: San Clemente, CA
Re: WCSTA -25- 10164Three pieces
I'm honored that my car made the first cut and was chosen by Stoddard to be in the top (or is that worst) 12 and was equally as surprised to see a pic of my car on the email to all the 356 Registry members. I have to think the members who don't go online often or were not aware of this contest, probably got that email and thought, "what on earth, WOW guys sure are willing to bring back ANYTHING!". And they'd be right.
Jack Staggs' shop learning all I can about 356's. Second is collecting 356 parts (more on that below) and third is becoming proficient at TIG welding. As such I tested out my welding skills on my 67 Caddy that I stripped down to bare metal in my driveway and began installing patch panels, the biggest of which was 39.5 inches in length, quite a big patch for me. Attached are some pics. I'm glad to say that the car is now at the paint shop and I'm finally back on the 356.
In addition to the "practice welding" on the Caddy, I've been collecting parts. Two of the parts I consider myself most lucky to have found are the A Coupe T1 in-dash ashtray and knob.
Some may be wondering what I've been doing to move this car closer to completion. Well for me that involves a few things. First is spending every Friday afternoon at https://www.instagram.com/trevorcgates/
- Craig Richter
- 356 Fan
- Posts: 1305
- Joined: Thu Dec 15, 2011 9:01 pm
- Location: San Miguel de Allende/Traunkirchen
Re: WCSTA -25- 10164Three pieces
3-piece 356 motors I've heard of; 3-piece 356s not so much. Please join me in voting for this worthy project being taken on by an outstanding young man. Ignore the fact that Trevor is one of my buddies, and that I would lie and cheat to help him out. He's the real deal, and this project WILL get finished; just much faster with a bunch of expensive parts in his stash. Thanks for looking...
PS: This message is also approved by Jack Staggs.
PS: This message is also approved by Jack Staggs.
- Eric Meyer
- 356 Fan
- Posts: 458
- Joined: Sun Mar 09, 2008 8:40 pm
- Location: California's Central Coast, not quite New Zealand... but close
- Contact:
Re: WCSTA -25- 10164Three pieces
We have a winner! Congrats!
Eric
Eric
-
- 356 Fan
- Posts: 1260
- Joined: Thu Feb 05, 2009 8:13 pm
- Location: Texas Panhandle South Plains
Re: WCSTA -25- 10164Three pieces
Trevor, the Normal engine in my old early '57 T1, was P63927, the first 1600 N, listed in the little spec book, for a '57, but somewhere along the way, I've lost the VIN #, so yours, based on the engine # above, is much later... Congratulations, again!
Mike