Earth wire fasteners and fixing points F&R on a '55

For Pre A discussions and questions
Post Reply
Message
Author
Vincent Gillespie
356 Fan
Posts: 439
Joined: Sun Jul 18, 2010 8:33 am
Location: United Kingdom

Earth wire fasteners and fixing points F&R on a '55

#1 Post by Vincent Gillespie »

From my photos I can't be sure of these and although the only thing that's critical is making sure the earth is good it would be nice to get them in the correct area.
I think the fasteners were simple slotted self tappers and, as far as the positioning, in the front were on the horn brackets and on the rear they are close to the corners of the engine 'tray', is this correct?
V
V. Gillespie

User avatar
Donald Zingg
356 Fan
Posts: 371
Joined: Mon Mar 05, 2012 3:03 pm
Location: Sunny So. California
Contact:

Re: Earth wire fasteners and fixing points F&R on a '55

#2 Post by Donald Zingg »

Are you referring to grounding of the tail lights, front lights and signal horns?

Martin Bruechle
356 Fan
Posts: 392
Joined: Thu Feb 23, 2017 12:41 am
Location: So Cal

Re: Earth wire fasteners and fixing points F&R on a '55

#3 Post by Martin Bruechle »

Donald Zingg wrote:Are you referring to grounding of the tail lights, front lights and signal horns?
UK and Aussies and other counties call ground connections earth connections.

User avatar
Donald Zingg
356 Fan
Posts: 371
Joined: Mon Mar 05, 2012 3:03 pm
Location: Sunny So. California
Contact:

Re: Earth wire fasteners and fixing points F&R on a '55

#4 Post by Donald Zingg »

Thanks Martin
I was asking Vincent to specify which electrical items are in question because some have a separate ground (earth) wire and some do not.

Vincent Gillespie
356 Fan
Posts: 439
Joined: Sun Jul 18, 2010 8:33 am
Location: United Kingdom

Re: Earth wire fasteners and fixing points F&R on a '55

#5 Post by Vincent Gillespie »

Hello Donald, yes you guessed correctly I'm wondering about the ground/earth connection for the headlights, indicators and horns and also the rear lights and reverse/number plate light. When I got the car they were earthed in the areas I mentioned but as KCT had a few front & rear 'dings' I thought I'd check if these connections and the slotted self tappers I found were what they would have been originally.

Thanks,

V
V. Gillespie

User avatar
Donald Zingg
356 Fan
Posts: 371
Joined: Mon Mar 05, 2012 3:03 pm
Location: Sunny So. California
Contact:

Re: Earth wire fasteners and fixing points F&R on a '55

#6 Post by Donald Zingg »

Vincent

The rear beehive lights and reverse light are grounded through their attachment to the body.
During installation of each light make sure at least one fastener contacts bare sheet metal.
Same applies to the front beehive lights.
The earth wires for the headlights and signal horns attach to the walls inside the battery box using an M5 slotted pan head screw, split lock washer and hex nut as shown below - - - - -
Attachments
ground connection.jpg

User avatar
Spencer Harris
356 Fan
Posts: 1149
Joined: Thu Mar 27, 2008 12:39 pm
Location: San Joaquin Valley, California

Re: Earth wire fasteners and fixing points F&R on a '55

#7 Post by Spencer Harris »

Confirming Donald's precise & accurate description for headlight & horn earth wires.
From my photo files of my '55 coupe with original wiring and body panels.
DSC_0067 (Large).JPG
DSC_0068 (Large).JPG
Spencer Harris
San Joaquin Valley, CA.

Vincent Gillespie
356 Fan
Posts: 439
Joined: Sun Jul 18, 2010 8:33 am
Location: United Kingdom

Re: Earth wire fasteners and fixing points F&R on a '55

#8 Post by Vincent Gillespie »

Thanks a mill to you both & perfect info, looks like one of the easier things for me to do. I was pretty sure with all the bumps and fixes over the years that no one would have bothered to put them where they should be.
V
V. Gillespie

Post Reply