Screws that hold the ally discs for the seat back buffers
Posted: Wed Jun 13, 2018 10:43 am
Hello, I'm having a 'Doubting Thomas' moment, I have what my notes and labels say are the screws that hold the circular aluminium discs that the seat back buffers rest on but they seem extraordinarily long.
The head is a perfect fit, the note & label says what they are, but they may have got mixed up during chroming, & none of my original photos show the full length, can anyone reassure me, before I cock it up, that the 20mm long screw shown in the photo is correct?
If they are correct it's yet another 4 holes for water to come in or out, I'm astonished how many of the fixing screws punch right through, a new use for a 356, a colander!
V&S
The head is a perfect fit, the note & label says what they are, but they may have got mixed up during chroming, & none of my original photos show the full length, can anyone reassure me, before I cock it up, that the 20mm long screw shown in the photo is correct?
If they are correct it's yet another 4 holes for water to come in or out, I'm astonished how many of the fixing screws punch right through, a new use for a 356, a colander!
V&S