55 Speedster Pre A
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
55 Speedster Pre A
As I probe and remove pieces from the passenger side threshold I'm thinking she still has most of her original carpet. From the pics if I can actually upload them you can see the original square weave.
What I have found is the carpet, to the best of my knowledge was originally tan and has been dyed black. I find that carpet that was not visible without removing carpet or the shift cover back side is tan. Rubber and cuts appear to be original, the wax soaked cheese cloth on the threshold lip appears to have been there from original build. Again, I'm not that familiar with the Pre A cars, but does it seems tan carpet was installed with black seats and trim. Comments from the experts and novices alike are welcome.
What I have found is the carpet, to the best of my knowledge was originally tan and has been dyed black. I find that carpet that was not visible without removing carpet or the shift cover back side is tan. Rubber and cuts appear to be original, the wax soaked cheese cloth on the threshold lip appears to have been there from original build. Again, I'm not that familiar with the Pre A cars, but does it seems tan carpet was installed with black seats and trim. Comments from the experts and novices alike are welcome.
Rusty
- Chuck House
- Registry Hall of Fame
- Posts: 731
- Joined: Wed Mar 19, 2008 3:26 pm
Re: 55 Speedster Pre A
Rusty,
It looks original. Cloth on the threshold edge is normal. The rubber is cut correctly. Black upholstery would usually have grey carpet but the grey of that period had a lot of brown in it and can easily look tan when old. I don't know of a source for the old grey carpet. The carpet available now is a bit too grey by comparison but works and looks fine.
It looks original. Cloth on the threshold edge is normal. The rubber is cut correctly. Black upholstery would usually have grey carpet but the grey of that period had a lot of brown in it and can easily look tan when old. I don't know of a source for the old grey carpet. The carpet available now is a bit too grey by comparison but works and looks fine.
Chuck House
Southern California
Southern California
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
Re: 55 Speedster Pre A
Chuck, I've requested the information from the Reutter guys, hopefully it will describe the carpet.
I'm a bit color blind, but after closer look it does appear to be fairly light grey in color. Believe I have a long way to go before I worry about the carpet. Anyone have a pic of the original carpet in their speedster? If so would like to see it. Having been around Porsches since the 60s this is like having a new girlfriend. She looks good but the more I spend with her I see she isn't perfect.
Hope there are only good stories about the LA lit meet,
Rusty
I'm a bit color blind, but after closer look it does appear to be fairly light grey in color. Believe I have a long way to go before I worry about the carpet. Anyone have a pic of the original carpet in their speedster? If so would like to see it. Having been around Porsches since the 60s this is like having a new girlfriend. She looks good but the more I spend with her I see she isn't perfect.
Hope there are only good stories about the LA lit meet,
Rusty
Rusty
- Donald Zingg
- 356 Fan
- Posts: 376
- Joined: Mon Mar 05, 2012 3:03 pm
- Location: Sunny So. California
- Contact:
Re: 55 Speedster Pre A
Rusty,
What color upholstery for your Speedster is indicated on its kardex?
What color upholstery for your Speedster is indicated on its kardex?
- Mike Smith
- 356 Fan
- Posts: 1275
- Joined: Wed Mar 26, 2008 10:55 am
- Tag: Its Only for Fun
- Location: Ramsden Heath, Essex, CM11 1HS, UK
- Contact:
Re: 55 Speedster Pre A
I first found this 35 years ago on an original Dec 1964 Porsche Built RHD `C` Coupe (131 899)Rusty Quote - the wax soaked cheese cloth on the threshold lip appears to have been there from original build.
I have never seen it mentioned anywhere since and those little drawings of the Carpet and Trim layout never showed it
However, this now establishes that it existed from 55 onwards on Reutter built cars
What about Karmann Builds ?
Mike Smith (Essex - UK)
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
Re: 55 Speedster Pre A
[img]
Inside door panel, vapor barrier and original carpet color.
Other pic is the poor state of things underneath the car. I will persevere.
[/img]Just wanted to share a few things I find along this journey.
Inside door panel, vapor barrier and original carpet color.
Other pic is the poor state of things underneath the car. I will persevere.
Rusty
- James Davies
- 356Talk Moderator
- Posts: 2959
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: 55 Speedster Pre A
Rusty, the vapor barrier and carpet scraps to pad against the inner door frame are original, but don't assume that the carpet scraps match the original carpet on your car. Reutter used whatever carpet scraps were laying around. Sometimes they used scraps of vinyl too. If you look at the bottom of Reutter coupe/cab seats, there are usually 2-3 carpet scraps used as padding there too, and usually none of them match.
My car had beige carpet scraps inside the door panels, but the original carpet on the car is dark blue.
My car had beige carpet scraps inside the door panels, but the original carpet on the car is dark blue.
- Spencer Harris
- 356 Fan
- Posts: 1149
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: San Joaquin Valley, California
Re: 55 Speedster Pre A
To James' point, this is a '53 cab seat frame; originally reddish brown leather (C501A) and most likely tan/beige carpet...James Davies wrote:Reutter used whatever carpet scraps were laying around. Sometimes they used scraps of vinyl too. If you look at the bottom of Reutter coupe/cab seats, there are usually 2-3 carpet scraps used as padding there too, and usually none of them match.
Spencer Harris
San Joaquin Valley, CA.
San Joaquin Valley, CA.
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
Re: 55 Speedster Pre A
James, totally agree with you regarding "assumptions". I've ordered the detail information from the Reutter chaps in Europe.
thanks to you guys for clarification.
thanks to you guys for clarification.
Rusty
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
Re: 55 Speedster Pre A
Stated earlier that PreA cars have forward outside seat bracket directly on the floor. Anyone have a picture of inside and bottom of car. Pics of what I’m finding. Small reinforcement pad on bottom..
Rusty
- Spencer Harris
- 356 Fan
- Posts: 1149
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: San Joaquin Valley, California
Re: 55 Speedster Pre A
From the same '53 cab.Rusty Ferrell wrote:Stated earlier that PreA cars have forward outside seat bracket directly on the floor. Anyone have a picture of inside and bottom of car. Pics of what I’m finding. Small reinforcement pad on bottom..
Original reinforcement plates & bolts were cut from the old floor pans. New bolts were fabricated using the original hex heads and welded to the new floor pans replicating the original welding pattern.
Spencer Harris
San Joaquin Valley, CA.
San Joaquin Valley, CA.
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
-
- 356 Fan
- Posts: 445
- Joined: Wed Mar 26, 2008 4:47 pm
- Location: Virginia Beach,VA
Re: 55 Speedster Pre A
Today we started to cut more floor away and as little parent metal as possible. I've been looking for dimensional drawings of door openings and and chassis dimensions for a Pre A Speedster with little luck.
Any help in finding a source would be helpful, even my A parts book doesn't have a speedster chassis. The supplement to the A has some information on the converible D, but still no chassis info.
Need information so I can add braces, don't trust the current body dimensions.
thanks,
Rusty
Any help in finding a source would be helpful, even my A parts book doesn't have a speedster chassis. The supplement to the A has some information on the converible D, but still no chassis info.
Need information so I can add braces, don't trust the current body dimensions.
thanks,
Rusty
Rusty
- James Davies
- 356Talk Moderator
- Posts: 2959
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: 55 Speedster Pre A
Rusty, the 1954 Porsche Service Manual has all the dimensional drawings you should need for the chassis. Email me if you don't have one.
- Martin Benade
- 356 Fan
- Posts: 12348
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 55 Speedster Pre A
If your doors are fairly intact they are a rather good indicating tool for the door openings, especially if most of the original lead is still there. The body was built with rather large gaps and leaded, often narrowed by 10 mm at the front and rear of the doors. Front leaded on the door, rear gap on the door jamb. You probably already know this.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna