Page 1 of 1

Pre A 2pc. Engine X2

Posted: Wed Feb 28, 2018 3:28 am
by Joe Ruiz
Putting together a couple of Pre A 1500cc engines this week. :wink:

Image

Re: Pre A 2pc. Engine X2

Posted: Thu Apr 19, 2018 11:58 am
by Joe Ruiz
Pistons / Cyls. are installed. Now pre fitting the sheetmetal, exhaust, fuel lines and installing oil sump.
Image
Image
Image

Re: Pre A 2pc. Engine X2

Posted: Thu Apr 19, 2018 2:01 pm
by Martin Bruechle
Very nice Joe. 2 thumbs up.

Re: Pre A 2pc. Engine X2

Posted: Thu Apr 19, 2018 8:51 pm
by Alan Hall
Which piston and cylinders are you using Joe?

Re: Pre A 2pc. Engine X2

Posted: Sat Apr 21, 2018 1:13 pm
by Mike TEMPELS
Hello joe , can you provide some circular oil sumps, like this mounted on your engine ?
Regards

Mike

Re: Pre A 2pc. Engine X2

Posted: Sat Apr 21, 2018 1:18 pm
by Joe Ruiz
Alan Hall wrote:Which piston and cylinders are you using Joe?
Hi Alan.

I'm using the Shasta Dura Bar iron cylinders and JE pistons/rings/pins/locks.

Re: Pre A 2pc. Engine X2

Posted: Sat Apr 21, 2018 1:19 pm
by Joe Ruiz
Mike TEMPELS wrote:Hello joe , can you provide some circular oil sumps, like this mounted on your engine ?
Regards

Mike
Unfortunately, I only have 'em for my engine restorations.

Re: Pre A 2pc. Engine X2

Posted: Thu Apr 26, 2018 2:21 am
by Mike TEMPELS
Joe , you do so a perfect work !
But send an engine from Europe to USA and back to have your awesome oil sump is too much for so a little guy like me . :D

Mike