Source for conduit

For Pre A discussions and questions
Post Reply
Message
Author
Tony Proasi
356 Fan
Posts: 166
Joined: Fri Jul 11, 2008 10:02 pm
Location: Louisville KY
Contact:

Source for conduit

#1 Post by Tony Proasi » Wed Mar 15, 2017 12:01 pm

Finishing up the floor on my '52 and looking for thought on the conduit that runs down the side of the tunnel it is 22mm in outer diameter. The wiring harness goes thru one side and the fuel and brake lines thru the other. Does anyone have a source for this?

Thanks,
Tony
Attachments
Tunnel .jpg

Brad Ripley
356 Fan
Posts: 3527
Joined: Tue Mar 25, 2008 9:28 pm

Re: Source for conduit

#2 Post by Brad Ripley » Wed Mar 15, 2017 3:03 pm

At least one metric steel tubing source is: http://www.metricmetal.com/products/rn2391.htm

User avatar
Norm Miller
356 Fan
Posts: 2194
Joined: Thu Mar 27, 2008 9:14 am
Tag: Official curmudgeon
Location: near Ft Collins

Re: Source for conduit

#3 Post by Norm Miller » Thu Mar 16, 2017 11:54 am

22mm is probably close enough to 7/8" (21.4375mm) which may be as hard to find as 22mm.

norm
 

Post Reply