"A" front fenders
- Mike DeJonge
- 356 Fan
- Posts: 699
- Joined: Thu Dec 25, 2008 7:58 pm
- Location: southern Ontario, Canada
- Contact:
"A" front fenders
Here we have new stampings for A front fenders, left and right. Wire rolled into the fender lip. Same dimensions as factory replacement, with the rain gutter at the hood, to meet the front nose. a small lip has been added at the front to make fitment much easier. After fitment has been done the lip can be trimmed off. Stamped as one piece, not hand made, so they will be the same every time. Laser trimmed every time so the trim will be the same every time. Part numbers 104AL and 104AR, going on our website, www.restoration-design.com this week, priced at $950.00 retail. made in Canada
Mike dejonge
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
- Jim Clement
- 356 Fan
- Posts: 1461
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: "A" front fenders
Those look amazing.. I would have REALLY liked those a few years ago when we were all doing head scratching on how to make all of those curves out of the puzzle pieces that we had.
Mike and gang - great idea.
Mike and gang - great idea.
- John Brooks
- 356 Fan
- Posts: 2146
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: "A" front fenders
Mike
That really looks very good. You just saves allot of A's and makes the repair a couple weeks quicker
That really looks very good. You just saves allot of A's and makes the repair a couple weeks quicker
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
- Trevor Gates
- 356 Fan
- Posts: 1089
- Joined: Thu Dec 10, 2009 6:52 pm
- Location: San Clemente, CA
Re: "A" front fenders
Looks real Nice Mike.
If I can make one suggestion, leave extra material where I’ve pointed at with the arrow and don’t fold the entire area. Let the person who’s installing the fender establish the curvature, as I’ve yet to see two doors the same.
If I can make one suggestion, leave extra material where I’ve pointed at with the arrow and don’t fold the entire area. Let the person who’s installing the fender establish the curvature, as I’ve yet to see two doors the same.
- Attachments
-
- 0FDB5FDB-5DEA-4837-8B0F-F93DD58D2505.jpeg (298.9 KiB) Viewed 787 times
https://www.instagram.com/trevorcgates/