Paint, Bondo, Seam Sealer, etc. Stripping to Bare Metal

For vendors to announce new 356 products, changes to existing products, recalls, request product feedback, other changes to their business.
Post Reply
Message
Author
Von R Harrington
356 Fan
Posts: 1
Joined: Mon Jul 31, 2017 10:00 am

Paint, Bondo, Seam Sealer, etc. Stripping to Bare Metal

#1 Post by Von R Harrington » Mon Jul 31, 2017 10:19 am

HTC Metals, Inc. We do complete paint, bondo, seam sealers, fiberglass, etc. removal from auto bodies and parts to bare metal. We do not use any media blasting of any type. We use only hot air in an oven for removal of paints and all things not metal. We use a mild acid bath for rust removal. We have complete removal of everything down to bare metal even behind brackets and inside ¼ panels and such where media blasting cannot reach. We submerge the body and parts in a rust preventative/acid neutralizer so there will be no acid leakage in the future of the rebuild. We also offer complete E-coating of auto bodies and parts if customer wishes for this service. All my info is listed at the bottom. We do complete stripping of bodies and all parts that are aluminum and ferrous metals. The facebook link on www.htcmetals.com will take you to pictures of our work.
Thank You,

Von R Harrington
HTC Metals, INC
Cell: (318) 277-7155
Office: (318) 628-3288
Mail: PO Box 55
Dodson, LA 71422
Physical: 105 W Gresham St
Dodson, LA 71422
Web Sites:
www.HTCMetals.com
www.NorthernFactory.com

Post Reply