4 Cam Cooling

[Ibrahim Kuzu]

Since 10 years building 4 Cam Carrera cooling shrouds, as factory did 60 years ago, one piece at a time.
And also modifying inner air channels to work in 616 pushrod engines.

We have ordered 100 pieces more stampings. If you need a set ,please inform.

We are since 15 years supplying the 547/692 Carrera 90 mm generator stands to enthusiast.
Now we have in stock ready to ship.

We are moving in a bigger shop, and housing new CNC machines to do machining all under one roof.
Some exciting parts for 616 engines on the way to beautify our beloved 356 engines in look and performance
and all looking 1960s,(no modern stuff.)

Ibrahim Kuzu
4 Cam Cooling Parts

[Jacques Lefriant]

too cool

[Spencer Harris]

Beautiful stuff Ibrahim. Wish I had a 4-cam!

[DonCichocki]

Looks like it fits a pushrod engine from the photos.

[Bill Sargent]

Spencer,

if you use a Wilhoit 2130 cc kit on a pushrod motor with Ibrahim's 4 cam cooling set up you can have a solid 160 hp and most of the look for way less than a true 4 cam. Or you can take it a step further and go dry sump with a V drive using pushrod distributors......

Faux cam motor with dry sump set up. Ibrahim's 4 cam cooling unit installed.

[Ibrahim Kuzu]

Guys,
Thank you...
Don,
You are correct..356 Pushrod Engine with Carrera cooling shroud, Carrera aluminum double fan and Carrera Aluminum generator stand.
Bill,
New design of twin dist.drive casting is looking nice...Great Job...
IK

[jason West]

Hi Ibrahim

I'm interested in your 4-Cam cooling. How do I get a hold of you?

Jason West
626 201 2067
the356hobbyist@gmail.com

[Ibrahim Kuzu]

Hi Jason,
Will drop you an email.
Thank you,
IK

[Craig Richter]

Have you had a chance to do any real-world testing of the cooling efficiency versus the stock shroud? Yours sure looks cool...

[James Self]

Hi Ibrahim,
I'm also very interested in this 4 Cam cooling setup.
Can you send me more information to james@internationalsupercars.com

Many thanks.
James

[Ibrahim Kuzu]

Hi Craig,
Thank you.
Yes,we did test runs long ago before we started putting together the 4 cam Shrouds
on our 616 engines.
We had to modify the Original Carrera inner air channels length and angle
for the 616 engine to get full force even air to cylinder heads and cylinders.
and running crank to fan pulley 1 to 1 ratio, like Carrera engine.
IK

[Ibrahim Kuzu]

If you like to request full info on the 4 Cam Cooling on our 616 engines
Please email direct:

kuzu356@aol.com

or Please call 214 460 0144
Thank you
Ibrahim

[Hermage Coward]

Would like information on your beautiful cooling fan set up. Please contact me at hermage@comcast.net

Hermage