Until now, the Pre Mat 616 Sump Plate ( http://precisionmatters.biz/356-sump-plate-w-plug.php ) had a "low temp" ND magnet which began to degrade at 180*F, well within the operating range of our engines. It remained much stronger than the stock unit, but under very prolonged use, it could become questionable.
We recently located and contracted for some special-order "HS" ND magnets which do not begin to degrade until they reach 300*F. I'm going to say they will NOT degrade in any use where the engine continues to function, no matter how long you run the car.
They do, however, come with a 'special' price, so to recover the addition, we have raised the price of the part some 10%; the new price is $132.90.
New "HS" magnet
- Ron LaDow
- 356 Fan
- Posts: 8094
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
New "HS" magnet
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz
- Paul Lima
- 356 Fan
- Posts: 509
- Joined: Fri Jan 10, 2014 2:02 pm
- Location: Gardnerville, NV
Re: New "HS" magnet
Hello Ron, since you have no other method listed of contacting you, I'm trying this one. Are you going to have a booth at Rennsport next week, and, if so, I'd like to buy one of your wheel balancing adaptor at that time.
Thanks,
Paul Lima
Thanks,
Paul Lima
- Wes Bender
- 356 Fan
- Posts: 4940
- Joined: Wed Aug 27, 2008 10:54 am
- Location: Somewhere in the Gadsden Purchase, USA
Re: New "HS" magnet
Paul, you call give him a call at the number listed on the home page of his website.....
Some days it's just not worth chewing through the restraints.....
- Ron LaDow
- 356 Fan
- Posts: 8094
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
Re: New "HS" magnet
Paul,
Nope, not going to make it to Rennsport, but 415-252-1428 gets answered all West Coast business hours and maybe a bit more. Got those in stock.
Wes; maybe that ought to be directly below the logo...
Thanks to both of you.
Nope, not going to make it to Rennsport, but 415-252-1428 gets answered all West Coast business hours and maybe a bit more. Got those in stock.
Wes; maybe that ought to be directly below the logo...
Thanks to both of you.
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz
- John Brooks
- 356 Fan
- Posts: 2172
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: New "HS" magnet
Ron
Drill out the drain plug on your sump plate and put one in there also. A 10 x 10mm set 8mm deep works great. To clean it you just stick it to a seel plate and pull. The magnet and fuzz stays stuck and the drain plug stays in your hand. Clean the magnet and reinsert it plug.
Drill out the drain plug on your sump plate and put one in there also. A 10 x 10mm set 8mm deep works great. To clean it you just stick it to a seel plate and pull. The magnet and fuzz stays stuck and the drain plug stays in your hand. Clean the magnet and reinsert it plug.
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965