Porsche356registry.org
http://forum.porsche356registry.org/

How to search?
http://forum.porsche356registry.org/viewtopic.php?f=15&t=42135
Page 1 of 1

Author:  Edwin Ek [ Tue Jul 19, 2016 6:19 pm ]
Post subject:  How to search?

Suppose I want to search for "GT seats". How do I do that? When I just type that into the search box, it says "GT" ignored. I have tried adding "+" in front of one or both elements of the search. "GT" is always ignored.

I get a useless 3,000 + results because the search is for "seats" only.

Author:  Sebastian Gaeta [ Tue Jul 19, 2016 10:40 pm ]
Post subject:  Re: How to search?

Ed,

This is quite the workaround but at least it gets the results you need: Search in Google "356 Registry GT Seats"

Author:  James Davies [ Wed Jul 20, 2016 11:00 am ]
Post subject:  Re: How to search?

on Google, use the following search phrase:

site:forum.porsche356registry.org "GT seats"

Author:  Edwin Ek [ Wed Jul 20, 2016 7:59 pm ]
Post subject:  Re: How to search?

Thanks guys for valuable tips! But why is this site's searching so difficult?

Author:  Sebastian Gaeta [ Wed Jul 20, 2016 10:56 pm ]
Post subject:  Re: How to search?

I certainly don't want to criticize volunteers but my experience on other sites using the exact same software is that virtually all of the features work better than here, not just the search feature.

That said, there is usually a workaround here and I am very happy the Registry site exists.

Author:  Heriberto Bazan [ Thu Apr 13, 2017 5:15 pm ]
Post subject:  Re: How to search?rack and pinion 64 356c

how to find leaks

Author:  Peter A. Maul [ Sat Sep 09, 2017 4:56 am ]
Post subject:  Re: How to search?

Trying to locate the Bill Doyle articles on Hirth roller crankshaft

Author:  Greg Bryan [ Sat Sep 09, 2017 11:38 am ]
Post subject:  Re: How to search?

Peter - Many of Bill's 4-cam articles appeared in the 356 Club of Southern California magazine. Bill may have been a contributor to the Registry magazine also in years past, but I'm not aware.
There is a reference to the 356 Club aricles in this forum from about 4-5 years ago.
http://www.abcgt.com/forum/5-4-Cam-Foru ... ranks.html
I did try a google search and found quite a few posts on Hirth cranks in the Registry Forums, but none by Bill
forum.porsche356registry.org "Hirth"
The 356 Registry magazine is not searchable by a word search, as such, since the old copies are saved as pictures of the pages and not as text. At least I'm not skilled enough to do it =8^)
Attachment:
356club.PNG
356club.PNG [ 249.24 KiB | Viewed 991 times ]

Added by edit
Here is the cover of a 356 Club mag from 2012 - not sure if that is a Hirth roller crank or not, but a good place to start.
You may be inquiring about the Hirth crank made in the 50's for the pushrod motors - that is a different animal.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/