Where to get Nerf Bars

[Greg Spreeman]

I've seen nerf bars on 356's but can't seem to find who sells or makes them. Who makes nerf bars, (at least to replace the front bumper), for a C?

Thanks all.

[Dirk Heinrich]

You might be able to fit these Nerf bars for 4 x $35 :

www.vintagespeedsters.com/parts/bumper.php#thumb

(I'd actually ask them if they fit on an original 356 - 'cause I am not sure)

or weld them for about 4 x $3.5 by yourself as I did:




If you are interested in the latter version, feel free to contact me

[David Grubbs]

The Goodie Store once had them. They were made by a guy in Morro Bay California. Pricey but gorgeous and flawless. See mine at

http://www.356registry.org/Members/grubbs/
http://zimmer.csufresno.edu/~davidgr/

Dave Grubbs
Member 10361

[Brad K]

great question - i had quite a time finding nerfs for my outlaw tour/track project - per the last post, craig campbell at cam-fab west in kayukas (sp?) near Morrow Bay made mine -

www.camfabmotorsports.com/fab.html

craig is a very cool guy, with in-depth race experience - his bars are made from scrap marine stainless railings - the workmanship is fantastic - the ends are completely covered - the mounting holes worked great - but they are pricey at about $125 ea -

i am not familar with the aforementioned bars, but i have seen the vw style, empi, and repro bars, and i wasn't too happy with them, size, quality, and fit-wise, but their price is impossible to beat! hope this helps, brad in seattle

[Urs Rieder]

I've seen nerf bars on 356's but can't seem to find who sells or makes them. Who makes nerf bars, (at least to replace the front bumper), for a C?

Thanks all.

I have a pair of used front nerf bars.
Urs Rieder

[steve brown]

I have a complete set of the really good ones for an "A" Porsche , with the
cross bars as well, show chrome.
have pictures. first $350.00 gets them! ( $350.00 was the cost to chrome
them!) or trade...
thanks for your interest.
Steve Brown 619/840-3948
p.s. the roll bar is sold
----- Original Message -----
From: "Urs Rieder" <urch11@sbcglobal.net>
To: <356talk@356registry.com>
Sent: Saturday, January 10, 2009 10:32 AM
Subject: [356Talk] Where to get Nerf Bars

Greg Spreeman wrote:

I've seen nerf bars on 356's but can't seem to find who sells or makes
them. Who makes nerf bars, (at least to replace the front bumper), for a
C?

Thanks all.

I have a pair of used front nerf bars.
Urs Rieder

Post generated using Mail2Forum via email.

[Brad K]

great question - i had quite a time finding nerfs for my outlaw tour/track project - craig campbell at cam-fab west in kayukas (sp?) near Morrow Bay made mine - he does A->C

www.camfabmotorsports.com/fab.html

craig is a very cool guy, with in-depth race experience - his bars are made from scrap marine stainless railings - the workmanship is fantastic - the ends are completely covered - the mounting holes worked great - but they are pricey at about $125 ea -

i have seen the vw style, empi, and repro bars, and i wasn't too happy with them, size, quality, and fit-wise, but their price is impossible to beat! hope this helps, brad in seattle