It is currently Thu Dec 13, 2018 6:05 pm

All times are UTC - 5 hours [ DST ]


Forum rules


Please click here to view the forum rules



Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Mon Oct 23, 2017 6:21 pm 
356 Fan

Joined: Mon Sep 01, 2008 1:34 pm
Posts: 45
Location: Cupertino, California
You may have seen it at Werks Reunion this past August. Here is the back story.
Back in the 1980's Don Bell asked John Gilbert and myself to help set up his '60 B Roadster for SCCA racing. The car had been raced in Southern California before Don bought but needed major re-design before becoming competitive. We moved the eng and trans up in the chassis, went to coil over springs and built much more powerful engines, the result was two PCRRC championships, the Nor Pac championship and a 6th the one year we decided to go back to Atlanta. Don moved onto pro racing the the old 356 sat until de-tuning it for vintage.

Two years ago Don and I decided to put it back on the street as a real canyon carver. Adam Johnson and his crew did all the steel work, body and paint. Just imagine how rough an old SCCA race car could get and add a factor of 10 and you will get some idea of what they faced. I suggested we remove all the trim, hood handle, name badges, side moldings etc. Remove the upper horn grills and turn signals (they have been relocated into the headlights) and add a Speedster windshield. The rear bumper cut outs were filled all bumper attachment holes filled and a GT deck lid added. The GT inspired head faring was the final touch. Adam suggested the color and I then found German square weave carpet and leather that complemented the paint. Autos International stitched it all up.

I rebuilt the racing gearbox with Speedster gears BBAB, but left the limited slip in. The engine is a pure Super 90 with a bit of head work and Elgin cam plus a Sebring exhaust. A bigger engine is planned for the future. Front brakes are fully ventilated rotors with calipers off an Alfa that bolt directly to the C spindles. The wheels are the same ones we raced on back in the day.


Attachments:
IMG_2723.jpg
IMG_2723.jpg [ 1.62 MiB | Viewed 1542 times ]
IMG_2724.jpg
IMG_2724.jpg [ 1.61 MiB | Viewed 1542 times ]

_________________
Llew Kinst
Top
 Profile  
Reply with quote  
PostPosted: Mon Oct 23, 2017 6:29 pm 
356 Fan

Joined: Mon Sep 01, 2008 1:34 pm
Posts: 45
Location: Cupertino, California
Here is what it looked like as a vintage racer and taking a victory lap at Laguna Seca.

Don was very much a part of the build, helping to pick engine and trans configurations, paint and interior colors and trim and much much more. The result is very much his vision of what an AZ canyon carver should be, light fast, and cool.

Look out all you guys in the Sedona area...


Attachments:
Winner.jpg
Winner.jpg [ 704.86 KiB | Viewed 1540 times ]
vintage.jpg
vintage.jpg [ 426.72 KiB | Viewed 1540 times ]

_________________
Llew Kinst
Top
 Profile  
Reply with quote  
PostPosted: Mon Oct 23, 2017 10:13 pm 
356 Fan

Joined: Wed Nov 23, 2011 10:52 am
Posts: 3425
Location: Cleveland, Ohio
As part of the old race modifications, was the rear torsion tube raised too, or just the engine and trans? It looks great. That is the only non-stock color I considered several years ago for my B Cab, before ending up with the usual - Ruby red.

_________________


Top
 Profile  
Reply with quote  
PostPosted: Mon Oct 23, 2017 10:45 pm 
356 Fan

Joined: Mon Sep 01, 2008 1:34 pm
Posts: 45
Location: Cupertino, California
As per SCCA rules at the time you could not move suspension pickup points. You could argue that moving the trans/engine up was moving a pick up point for the swing axle. But by the the early 80's cut hoops were OK. The car was white from the factory.. not enough bling for this car.

_________________
Llew Kinst


Top
 Profile  
Reply with quote  
PostPosted: Tue Oct 24, 2017 6:50 pm 
356 Fan
User avatar

Joined: Fri Jan 10, 2014 2:02 pm
Posts: 177
Location: Carson City, NV
BTW, if you like the look of that fairing, check out my ad: https://porsche356registry.org/classifieds/17171


Top
 Profile  
Reply with quote  
PostPosted: Mon Jan 08, 2018 9:15 am 
356 Fan

Joined: Thu May 12, 2011 6:38 am
Posts: 29
who makes the fairing --is it fiberglass or alum.---can anyone help --thanks

_________________


Top
 Profile  
Reply with quote  
PostPosted: Mon Jan 08, 2018 1:47 pm 
356 Fan

Joined: Mon Sep 01, 2008 1:34 pm
Posts: 45
Location: Cupertino, California
The one on Don's car is from GT weeks and is Aluminum

_________________
Llew Kinst


Top
 Profile  
Reply with quote  
PostPosted: Tue Jan 09, 2018 7:35 am 
356 Fan
User avatar

Joined: Sun Apr 13, 2008 7:48 pm
Posts: 222
Location: Hillsborough, NC
Fashion News Alert: Ultraviolet is the pantone for 2018. Just goes to show how up to date we old fogies are!

Very nice color scheme for the car!

_________________


Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 21, 2018 11:07 am 
356 Fan

Joined: Sat Apr 26, 2008 1:22 pm
Posts: 91
Llew how did yo get the vented rotors in the front. Later 911 hubs? Mike

_________________


Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 21, 2018 11:44 am 
356 Fan

Joined: Mon Sep 01, 2008 1:34 pm
Posts: 45
Location: Cupertino, California
The rotors bolt directly to the hubs as on any early 911 but the calipers are Brimbos from an Alfa. Aluminum and bolt directly to the spindle without any modification. The spacing is perfect too.

_________________
Llew Kinst


Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 21, 2018 12:53 pm 
356 Fan
User avatar

Joined: Tue Jul 08, 2008 11:50 am
Posts: 708
Location: Whidbey Island WA.
Don was at Rennsport with his old Roadster parked with the outlaws. He raced his speedster, I was lucky enough to walk through the Pits and help him out. Still a good driver and a Great Guy.


Attachments:
image.jpeg
image.jpeg [ 1.34 MiB | Viewed 388 times ]

_________________
John Brooks

62 Roadster
66 912
getting pushed around in porsches since 1965


Last edited by John Brooks on Tue Oct 23, 2018 12:28 am, edited 1 time in total.
Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 21, 2018 12:56 pm 
356 Fan
User avatar

Joined: Tue Jul 08, 2008 11:50 am
Posts: 708
Location: Whidbey Island WA.
The old roadster Toneau I did not touch it or ask, but I think it was glass


Attachments:
image.jpeg
image.jpeg [ 911.46 KiB | Viewed 387 times ]
image.jpeg
image.jpeg [ 1.04 MiB | Viewed 387 times ]
File comment: Toneau
image.jpeg
image.jpeg [ 880.11 KiB | Viewed 387 times ]

_________________
John Brooks

62 Roadster
66 912
getting pushed around in porsches since 1965
Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 21, 2018 3:05 pm 
356 Fan

Joined: Mon Sep 01, 2008 1:34 pm
Posts: 45
Location: Cupertino, California
We did end up going with a glass toneau. We took the mold off a aluminum one and then modified it to be a bit cleaner around the passenger.

_________________
Llew Kinst


Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 21, 2018 7:10 pm 
356 Fan
User avatar

Joined: Thu Dec 10, 2009 6:52 pm
Posts: 783
Location: San Clemente, CA
Llew - I remember your car from the 2017 Werks Reunion. The paint really looks fantastic in direct sunlight.


Attachments:
IMG_0113.jpg
IMG_0113.jpg [ 949.75 KiB | Viewed 360 times ]
IMG_0114.jpg
IMG_0114.jpg [ 1.25 MiB | Viewed 360 times ]
IMG_0115.jpg
IMG_0115.jpg [ 1.17 MiB | Viewed 360 times ]

_________________
Engine # P66909... are you out there :-)
Fun 356 events in SoCal = http://356club.org/
https://www.instagram.com/trevorcgates/
Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 21, 2018 7:32 pm 
356 Fan

Joined: Mon Sep 01, 2008 1:34 pm
Posts: 45
Location: Cupertino, California
Thanks for the sharing the great shots. That was our first event with the car. It now lives in AZ with Don

_________________
Llew Kinst


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group