It is currently Wed Jun 28, 2017 11:49 pm

All times are UTC - 5 hours [ DST ]


Forum rules


Please click here to view the forum rules



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Custom badge for Outlaw
PostPosted: Wed Jun 08, 2016 5:42 pm 
356 Fan

Joined: Fri Apr 06, 2012 9:48 pm
Posts: 21
Location: Jersey City
Tag: Taxidodger
Does anyone know of a company that can make a custom badge for the 356 engine cover.
I would like to have a badge made in the same style as the "1600" that is placed beneath the Porsche logo (on the A's and B's) but that reads "2600". I have seen something similar on some of the 356's with Poly motors. I figure that it can't be too difficult for a person with the right skills and tools to modify the 1600 badge by replacing the 1 with a 2.
thanks!

John

_________________


Top
 Profile  
Reply with quote  
PostPosted: Thu Nov 10, 2016 11:55 am 
356 Fan

Joined: Tue Apr 08, 2008 5:35 pm
Posts: 28
Location: Sacramento
Hi John,
Were you able to find a source for a custom badge for your car. I am looking for a 2400.
Bob
916-955-8427


Top
 Profile  
Reply with quote  
PostPosted: Fri Nov 11, 2016 3:42 pm 
356 Fan
User avatar

Joined: Tue Jul 08, 2008 11:50 am
Posts: 416
Location: Whidbey Island WA.
If you want new custom badges, find a local jeweler that can do a lost wax casting, some old dentist can also do it. A local silver smith or jewelry artesian from the flea market might have the tooling.

Use an original script as a pattern in silicone elastomer. Remove the original script, Then pout in the green wax into the silicon mould.

You now have a green wax impression of the script. Replace the 16 with a new 24 in the wax impression Pour a plaster cast around the wax. Then melt out the wax and you have a mould of the numbers. Once you have a mould you melt any metal and cast new numbers. Then polish the casting and electroplated it gold. The wax can be carved to replace the original number. You can modify the mould to include the post for attaching it to the car, if you do a split mould. A good jeweler or hobby casting guy can make the emblems.

No idea how much each one would cost, it's not too hard, but the cast metal tooling is the problem. Some one who does ceramics might also be able to do this.

https://youtu.be/t1_NZKTewtg
https://youtu.be/zdoWE_Vr8b8

_________________
John Brooks

62 Roadster
66 912
getting pushed around in porsches since 1965


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group