911 into 356
-
- 356 Fan
- Posts: 22
- Joined: Thu Jul 15, 2010 2:43 am
911 into 356
Is it possible to install the very early 20.litre 911 engines into a 356A and onto the stock rebuilt gearbox, any advice would be appreciated.
I am building and Outlaw car but i am keen to keep a Porsche power plant and stock gearbox and rear suspension.
I have seen pictures of later 911 engines installed but onto different gearboxes and changing all the rear suspension.
Any advice would be very much appreciated, thank you
I am building and Outlaw car but i am keen to keep a Porsche power plant and stock gearbox and rear suspension.
I have seen pictures of later 911 engines installed but onto different gearboxes and changing all the rear suspension.
Any advice would be very much appreciated, thank you
- Jacques Lefriant
- 356 Fan
- Posts: 4655
- Joined: Mon Dec 06, 2010 1:50 pm
- Location: Washoe county NV
Re: 911 into 356
Hi Mark
the short answer is don't do it.
If you must. find an early 901 flywheel with the 109 tooth count and use the ring spacer from a Carrera2. Take out a good inurance policy and be ready to change your gearbox like your underwear. It is possible to use a more robust version of you gearbox but even spending a lot of time reinforcing it you would be better off with a 911 box. Andy Prill at Maxwell and Page may give you some of his hard earned advice from your side of the pond. Mike Smith may be able to get you committed to a mental instution. And you Brits think that we are the crazy ones.
KTF
jacques from southern california where we race offroad with swing axles.
the short answer is don't do it.
If you must. find an early 901 flywheel with the 109 tooth count and use the ring spacer from a Carrera2. Take out a good inurance policy and be ready to change your gearbox like your underwear. It is possible to use a more robust version of you gearbox but even spending a lot of time reinforcing it you would be better off with a 911 box. Andy Prill at Maxwell and Page may give you some of his hard earned advice from your side of the pond. Mike Smith may be able to get you committed to a mental instution. And you Brits think that we are the crazy ones.
KTF
jacques from southern california where we race offroad with swing axles.
-
- 356 Fan
- Posts: 22
- Joined: Thu Jul 15, 2010 2:43 am
Re: 911 into 356
Thank you Jacques, just the post i was hoping. As i am building an Outlaw car i carnt just run a stock looking engine, any advice on this point?
- Barry Brisco
- 356 Fan
- Posts: 3977
- Joined: Sun Mar 09, 2008 4:41 pm
- Tag: Porsche enthusiast
- Location: San Francisco
- Contact:
Re: 911 into 356
Mark, there are many 356 "outlaws" out there with stock appearance 356 engines. If you just have to get a different "look", you could add a full flow oil filter and some aftermarket air cleaners. Have you seen these? http://www.mainelycustombydesign.com/en ... #airfilterMark Curbishley wrote:As i am building an Outlaw car i carnt just run a stock looking engine, any advice on this point?
Only for Solexes and Webers however, not Zeniths.
There have been previous topics on 356Talk about the extreme difficulty of installing a 911 6-cylinder engine in a 356. And it will make the car very "tail heavy" and dramatically change the handling (and not for the better). The 356 suspension was not designed to have that kind of weight hanging off the rear end of the car.Mark Curbishley wrote:Is it possible to install the very early 20.litre 911 engines into a 356A...
Good luck,
Barry Brisco
1959 356A Coupe 105553, Ivory / Brown
2009 987 Cayman, Carrera White / Beige (daily driver)
1959 356A Coupe 105553, Ivory / Brown
2009 987 Cayman, Carrera White / Beige (daily driver)
- Jacques Lefriant
- 356 Fan
- Posts: 4655
- Joined: Mon Dec 06, 2010 1:50 pm
- Location: Washoe county NV
Re: 911 into 356
Hi Mark
I think the 911 Altenator/fan is a good idea but i haven't seen any nice ones for the 616 engine. even the Type IV ones don't come over as good as Ibraham's Carrera one does. and you can get you must know the 911 engine for less money. The Type IV engine does not have much of a weight problem and Jake Raby has perfected the kit to install one. I would like to see a Flat fan conversion but not like the Covair belt. something like the Porsche Elva and the 935. If you must keep the swing axle box consider a later 741 and you might need my Cadrobbi conversion for the diff.
"Rebuilt" stock 519/644/716 are weak even when a knowlegeable person does them. Hey if you have a bunch of Euros laying around Eleven parts just put a rebuilt 587 engine on the market.
KTF FCF
jacques
I think the 911 Altenator/fan is a good idea but i haven't seen any nice ones for the 616 engine. even the Type IV ones don't come over as good as Ibraham's Carrera one does. and you can get you must know the 911 engine for less money. The Type IV engine does not have much of a weight problem and Jake Raby has perfected the kit to install one. I would like to see a Flat fan conversion but not like the Covair belt. something like the Porsche Elva and the 935. If you must keep the swing axle box consider a later 741 and you might need my Cadrobbi conversion for the diff.
"Rebuilt" stock 519/644/716 are weak even when a knowlegeable person does them. Hey if you have a bunch of Euros laying around Eleven parts just put a rebuilt 587 engine on the market.
KTF FCF
jacques
-
- 356 Fan
- Posts: 22
- Joined: Thu Jul 15, 2010 2:43 am
Re: 911 into 356
Hi Jacques
Again great information, i am afraid i am stuck with the 644 gearbox as Mike Smith just went through it at considerable expense.
Jake Raby did have a 911 style cooling kit but it disappeared almost overnight, i am not sure why, i asked but there was nothing left or available, and i have not seen anybody offer one since
I think it will have to be a C, SC or 912 engine and make it look as good as i can!
Again great information, i am afraid i am stuck with the 644 gearbox as Mike Smith just went through it at considerable expense.
Jake Raby did have a 911 style cooling kit but it disappeared almost overnight, i am not sure why, i asked but there was nothing left or available, and i have not seen anybody offer one since
I think it will have to be a C, SC or 912 engine and make it look as good as i can!
- Jacques Lefriant
- 356 Fan
- Posts: 4655
- Joined: Mon Dec 06, 2010 1:50 pm
- Location: Washoe county NV
Re: 911 into 356
Hi Mark
Good on you as your cousins down under say. just keep the horsepower under 200 DIN or Mike may have to get some of my parts if you don't
jacques
Good on you as your cousins down under say. just keep the horsepower under 200 DIN or Mike may have to get some of my parts if you don't
jacques
- Adam Wright
- Classifieds Monitor
- Posts: 10321
- Joined: Wed Mar 12, 2008 1:00 am
- Tag: KTF
Re: 911 into 356
Ibraham's Carrera set-up is very cool, anyone know what he is charging these days?
www.unobtanium-inc.com
Check out my Barn Find column in the Registry magazine, always looking for good stories.
Check out my Barn Find column in the Registry magazine, always looking for good stories.
-
- 356 Fan
- Posts: 92
- Joined: Thu Dec 02, 2010 1:24 pm
Re: 911 into 356
curbo; do it! Then flip it on it's ear and get yourself a right proper early 23 and quit messing around with these dinky cars.
-
- 356 Fan
- Posts: 1030
- Joined: Wed Jun 11, 2008 5:01 pm
Re: 911 into 356
Last edited by Jack Staggs on Tue May 17, 2011 1:18 am, edited 1 time in total.
- Mike Klapac
- 356 Fan
- Posts: 690
- Joined: Thu Apr 03, 2008 12:41 pm
Re: 911 into 356
Stop worrying about how it looks and start worrying about how to make it faster?Mark Curbishley wrote:Thank you Jacques, just the post i was hoping. As i am building an Outlaw car i carnt just run a stock looking engine, any advice on this point?
Install a T4?
Install a stroked T1?
Both of these can run 911 shrouds.
Raby stopped using 911 shrouds because they don't cool as evenly as the DTM shrouds that he sells. Apparently the temperature spread between cylinders was too great.
-
- 356 Fan
- Posts: 22
- Joined: Thu Jul 15, 2010 2:43 am
Re: 911 into 356
Thanks Mike
Yeah i think Type 1 looks the best bet as i am in touch with the best Type 1 builder in the UK
I figured there had to be a problem with the Bergman 911 setup as it seemed to disappear almost overnight, looked cool though
Yeah i think Type 1 looks the best bet as i am in touch with the best Type 1 builder in the UK
I figured there had to be a problem with the Bergman 911 setup as it seemed to disappear almost overnight, looked cool though