Need muffler opinions
-
- 356 Fan
- Posts: 777
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
Need muffler opinions
Here is a muffler I found that might work. I have an Bursht extractor sytem and was looking for a cheap replacement for the muffler. Any opinions?
http://www.jbugs.com/product/3322.html? ... e-mufflers
http://www.jbugs.com/product/3322.html? ... e-mufflers
Greg Spreeman
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
- Michael Banchero
- 356 Fan
- Posts: 386
- Joined: Wed Mar 26, 2008 11:14 am
- Location: SAN FRANCISCO
Re: Need muffler opinions
If it bolts up, make sure it clears the body. Looks affordable to me.
michaelb
michaelb
- Pat Daily
- 356 Fan
- Posts: 1140
- Joined: Sat Mar 29, 2008 12:04 pm
- Location: central Virginia
Re: Need muffler opinions
I have one like that on my Ghia. Periodically I will by a new one--they can be kinda loud because the glass blows out after awhile. But they last a long time. I had to reject my car afterwards to run a bit more on the rich side.
Pat Daily
Midlothian, VA
356B coupe (121123 aka "Fast Frieda")
Midlothian, VA
356B coupe (121123 aka "Fast Frieda")
Re: Need muffler opinions
The question is whether or not the flange bolt circle/pattern is the same as on a Bursch.
And frankly, the transition from header outlet size and muffler pipe dia. kinda sucks.
Its a shame that there are so few good muffler solutions for a Bursch header. I've struggled with this issue many times over the last 25 years.
If you go for it, let us know how the matchup works out.
Keep 'em flying.
And frankly, the transition from header outlet size and muffler pipe dia. kinda sucks.
Its a shame that there are so few good muffler solutions for a Bursch header. I've struggled with this issue many times over the last 25 years.
If you go for it, let us know how the matchup works out.
Keep 'em flying.
- Shane Balkowitsch
- 356 Fan
- Posts: 1178
- Joined: Thu Jan 07, 2010 2:48 pm
- Location: Bismarck, North Dakota, USA
- Contact:
Stebro
I have to tell you, not just because I have a Stebro and not because I sell them for the company, but the exhaust is amazing, the sound is awesome, checkout my Restoration Site if you get a chance, it sounds even better than it looks.
Thanks,
Shane
Thanks,
Shane
Shane Balkowitsch
1965 Porsche 356C Outlaw
Don't Hate Me for My Outlaw Tendencies
356 Registry Member #: 31354
http://www.btinet.net/~sharoncol/porsche356.htm
http://356registry.com/forum/viewtopic.php?p=72623#72623
1965 Porsche 356C Outlaw
Don't Hate Me for My Outlaw Tendencies
356 Registry Member #: 31354
http://www.btinet.net/~sharoncol/porsche356.htm
http://356registry.com/forum/viewtopic.php?p=72623#72623
- Jim Breazeale
- Classifieds Monitor
- Posts: 2804
- Joined: Thu Mar 27, 2008 8:07 pm
- Tag: SF Giants Fan
- Location: SF Bay Area
- Contact:
Re: Need muffler opinions
Greg
There are about as many combinations of flanges and, more importantly, the angle of the pipes as there are manufacturers of "extractor" exhausts. The chances of that random muffler fitting your exhaust are slim to none. "Back in the day" every budding Porsche enthusiast manufactured an "extractor" exhaust in his garage and was in the business. No two of them will interchange parts. There are more combinations than can be counted. Forget trying to buy a suitable replacement. Go to a local muffler shop and have them fab up a muffler and exhaust pipe. Don't waste your money on some ramdom piece of junk on EBAY.
Regards
There are about as many combinations of flanges and, more importantly, the angle of the pipes as there are manufacturers of "extractor" exhausts. The chances of that random muffler fitting your exhaust are slim to none. "Back in the day" every budding Porsche enthusiast manufactured an "extractor" exhaust in his garage and was in the business. No two of them will interchange parts. There are more combinations than can be counted. Forget trying to buy a suitable replacement. Go to a local muffler shop and have them fab up a muffler and exhaust pipe. Don't waste your money on some ramdom piece of junk on EBAY.
Regards
Jim Breazeale
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
-
- 356 Fan
- Posts: 242
- Joined: Wed Jun 11, 2008 10:57 am
- Location: Central and Shenandoah Valley VA
- Contact:
Re: Need muffler opinions
Few of these exhausts make any meaningful horsepower. The Tangerine Racing exhaust was Air Cooled Technologies choice for a long time. I understand Jake is making his own but I've not seen it.
Straight pipes don't work unless you are going to be running it wide open and keeping your rpm in the upper reaches of the engine. Just like drag pipes on a V-Twin; they aren't much for torque but they do work at the limit and why they are called "drag pipes".
NLA has a nice aftermarket exhaust called the Super Sound.
M&K makes a dual pipe or single for the 912 based on Abarth internals and like everything else they make is quite light. They sound nice too. Good people to work with too.
Tom
Straight pipes don't work unless you are going to be running it wide open and keeping your rpm in the upper reaches of the engine. Just like drag pipes on a V-Twin; they aren't much for torque but they do work at the limit and why they are called "drag pipes".
NLA has a nice aftermarket exhaust called the Super Sound.
M&K makes a dual pipe or single for the 912 based on Abarth internals and like everything else they make is quite light. They sound nice too. Good people to work with too.
Tom
1964 356 SC
1967 911
1974 911
1973 914S
2004 GT3
1967 911
1974 911
1973 914S
2004 GT3
Re: Need muffler opinions
Greg,,, inexpensive for Bursch try a straight pipe and insert a Chirco baffle.Greg Spreeman wrote:Here is a muffler I found that might work. I have an Bursht extractor sytem and was looking for a cheap replacement for the muffler. Any opinions?
http://www.jbugs.com/product/3322.html? ... e-mufflers
good luck
Re: Need muffler opinions
Has anyone tried a Hushpower HP-2 series on an extractor?
Thanks,
Thanks,
-
- 356 Fan
- Posts: 777
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
Re: Need muffler opinions
I think I'm going to stick with my current setup. The muffler works for now except, there is a leak around one of the edges. I can throw on some gray high temp paint but, any ideas as to how to seal up the leak? Can I use JB weld or will that just fall off with all of the heat?
Greg Spreeman
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
-
- 356 Fan
- Posts: 242
- Joined: Wed Jun 11, 2008 10:57 am
- Location: Central and Shenandoah Valley VA
- Contact:
Re: Need muffler opinions
I'd try to spot weld it with a Mig (if the metal is up to the task). Here is another option I was aware of but have never tried. Let us all know how it works out. 600 degrees should be plenty.
Tom
http://www.amazon.com/J-B-Weld-8265-S-C ... B0006O1ICE
Tom
http://www.amazon.com/J-B-Weld-8265-S-C ... B0006O1ICE
1964 356 SC
1967 911
1974 911
1973 914S
2004 GT3
1967 911
1974 911
1973 914S
2004 GT3
- Bob Kelly
- 356 Fan
- Posts: 56
- Joined: Thu Mar 27, 2008 6:23 pm
- Contact:
Re: Need muffler opinions
I picked up a 68 912 motor for my 62 Hardtop while the super is being rebuilt. It came with a extractor exhaust but no muffler. Picked up a flange and some 2-1/2" pipe and started welding. The pipe goes through the cans and is drilled with steel wool stuffed in the space between. The two outlets fit in the body where the normal outlets would.
Bob Kelly
62 Hardtop
66 912
62 Hardtop
66 912
-
- 356 Fan
- Posts: 951
- Joined: Wed Apr 02, 2008 11:52 am
Re: Need muffler opinions
Steel Wool........A Flame thrower for sure......keep you eye on the fire balls your throwing behind you !
Contact email Spyderwerks@comcast.net
- C J Murray
- 356 Fan
- Posts: 9233
- Joined: Fri Oct 23, 2009 7:24 pm
- Location: 30MI WEST OF PHILA
- Contact:
Re: Need muffler opinions
Anyone facing this issue with a Bursch should consider a possible exhaust system change. The fact is that the stock muffler makes better quality power. Even if you are on a budget you can watch the classifieds until a nice used one comes up for sale. If you don't find that sporty enough then one of the aftermarket mufflers that are similar to stock are good. I had a K&W that was very nice and some others have been mentioned.
'57 Speedster
'59 Sunroof
'60 Devin D Porsche Race Car
'63 Cabriolet "Norm"
'67 911 S Original Owner
'03 Ferrari 575M
'09 Smart Passion
'59 Sunroof
'60 Devin D Porsche Race Car
'63 Cabriolet "Norm"
'67 911 S Original Owner
'03 Ferrari 575M
'09 Smart Passion
- Michael Moss
- 356 Fan
- Posts: 158
- Joined: Sat Apr 26, 2008 1:22 pm
- Location: Livermore, Ca
Re: Need muffler opinions
Bob do you have any pictures of the back your car with the muffler you made. I was thinking about making one similar for my C. Hows the performance? Mike