Page 1 of 1

Interior Porsche 356 C Coupe

Posted: Sat Feb 16, 2019 5:08 am
by Guido Kwikkers
I am (about to) install a new carpetset for my 356 C Coupe from 64.
Much looking for pictures of how the rear section (Tunnel, rear passenger and behind front seats) should look like.

Does anyone have pictures (from concours 356 Coupe cars) available for reference?
This will be determin how it should be installed.

I am struggling to termin how the tunnel section should be done

Re: Interior Porsche 356 C Coupe

Posted: Sat Feb 16, 2019 12:59 pm
by Max Handley
Hope this helps

Re: Interior Porsche 356 C Coupe

Posted: Sat Feb 16, 2019 10:08 pm
by Doug McDonnell
Be aware that the vertical in front of the rear seats will be a little different in Karmann vs Reutter as there are "stand offs" for lower luggage strap bars on Karmann. viewtopic.php?f=1&t=30319 I also padded the top of that piece so it was a little thicker so carpet would not have such an acute bend.
rear carpet 3.jpg
rear carpet 3.jpg (123.3 KiB) Viewed 1383 times
Pics are from my car being done so not a concours car.

Re: Interior Porsche 356 C Coupe

Posted: Sun Feb 17, 2019 1:19 pm
by Fred Otjen
The holes for attaching a 3 point seat belt are not shown in these pictures. Where exactly are they? Or, have you covered them up or maybe they were not built in your cars?

Re: Interior Porsche 356 C Coupe

Posted: Sun Feb 17, 2019 1:22 pm
by Doug McDonnell
Those pictures were taken during install. Yes Fred my 65 C has them.I just don't have a picture showing them.

Re: Interior Porsche 356 C Coupe

Posted: Mon Feb 18, 2019 3:56 pm
by Guido Kwikkers
Very helpful, thanks. Is the tunnel between left and right back seat covered with soft material to make it more comfortable?
What about the lower section behind the front seats?

I noticed that in the back panel (left and right) a round (plastic) black is used, but not all cars have it (anymore)

Re: Interior Porsche 356 C Coupe

Posted: Mon Feb 18, 2019 4:02 pm
by Doug McDonnell
C coupe shoulder harness mount cover 001.JPG
C coupe shoulder harness mount cover 001.JPG (30.5 KiB) Viewed 1315 times
The Hump between the rear seats had a coconut shell covering originally. I padded mine with a "cap"of soundproofing material. The black escutcheons are larger than the ones used for window winder and door handle and have a plastic piece inside them. Very hard to find