Early engines had a rear most engine sheet metal piece with a spot welded shut cover over a crank start hole. At some point this part was changed to eliminate the hole and the cover. I believe this change occurred approximately 1959 or 1960. Can anyone with an original '59 or '60 shed any light on when the part was changed by saying which part their car came with and their engine s/n?
Thanks.
Engine sheet metal breast plate
- Alan Hall
- 356 Fan
- Posts: 1462
- Joined: Wed Mar 26, 2008 12:06 pm
- Location: Orinda, CA
- John Lindstrom
- 356 Fan
- Posts: 336
- Joined: Mon Oct 23, 2017 9:51 am
- Location: Stanford, Ca. USA
Re: Engine sheet metal breast plate
There is one on mine built 7/59.
Last edited by John Lindstrom on Mon Aug 13, 2018 7:04 am, edited 1 time in total.
-
- 356 Fan
- Posts: 600
- Joined: Wed Mar 26, 2008 1:35 am
- Location: Colorado
Re: Engine sheet metal breast plate
The starting crank was eliminated on Type 2 VWs on 29 August 1958, so existing stocks of Type 2 breastplates with the hole (subsequently modified by Porsche) would dry up shortly afterward.
Jan Kolm
356 Registry #1066
1960 1600N Coupe
356 Registry #1066
1960 1600N Coupe
- Mike Smith
- 356 Fan
- Posts: 1276
- Joined: Wed Mar 26, 2008 10:55 am
- Tag: Its Only for Fun
- Location: Ramsden Heath, Essex, CM11 1HS, UK
- Contact:
Re: Engine sheet metal breast plate
John - Cover over a crank start hole? Not on my 59.
John,
Your Chassis number would help to give this discussion a Data Point
(On the assumption that your breast Plate is known to be original to the car)
Mike Smith (Essex - UK)
- Alan Hall
- 356 Fan
- Posts: 1462
- Joined: Wed Mar 26, 2008 12:06 pm
- Location: Orinda, CA
Re: Engine sheet metal breast plate
John, I see you revised your post, are you saying now that your car has the breastplate with the starting hole cover?
Thanks Jan for the input on when the crank hole was eliminated by VW, so I would expect the change would have occurred at Porsche some time in '59 as the vendor to Porsche used up his supplies of the of the early part to modify.
Thanks Jan for the input on when the crank hole was eliminated by VW, so I would expect the change would have occurred at Porsche some time in '59 as the vendor to Porsche used up his supplies of the of the early part to modify.
- Alan Hall
- 356 Fan
- Posts: 1462
- Joined: Wed Mar 26, 2008 12:06 pm
- Location: Orinda, CA
Re: Engine sheet metal breast plate
Thought I would add a couple photos....with and without the cover to clarify what I am asking about. Would appreciate it if anyone with a '59 who has original engine or original engine sheetmetal could take a quick look in there engine compartment and let me know if they have the cover or not,
Thanks
Thanks
-
- 356 Fan
- Posts: 4207
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Engine sheet metal breast plate
BTW, the part number did not change although the drawing in the 356B parts book does not show the access cover any longer.
- John Lindstrom
- 356 Fan
- Posts: 336
- Joined: Mon Oct 23, 2017 9:51 am
- Location: Stanford, Ca. USA
Re: Engine sheet metal breast plate
Yeah now that I understand your question my 7/59 has one like the pic. Does anyone have a diagram of the device that they used to crank over the engine?
-
- 356 Fan
- Posts: 53
- Joined: Sun Aug 30, 2009 4:04 pm
- Location: UK, South East
Re: Engine sheet metal breast plate
Alan
Probably no surprise to you, but a reference point nonetheless, my 3rd March 1960 T5B does not have the cover. Same as the first of your two photos therefore. Engine number P601801.
Phil
Probably no surprise to you, but a reference point nonetheless, my 3rd March 1960 T5B does not have the cover. Same as the first of your two photos therefore. Engine number P601801.
Phil
Phil Parry
Essex, UK
1960 BT5 110563 RHD
1954 Pre A 1500s 1953 model year (project)
1957 Speedster (project)
1972 Original unrestored VW camper
Essex, UK
1960 BT5 110563 RHD
1954 Pre A 1500s 1953 model year (project)
1957 Speedster (project)
1972 Original unrestored VW camper