Page 1 of 1
Bent window trim & connector
Posted: Tue Apr 10, 2018 11:00 am
by E Rutherford
Recently had a 53 cab come into the shop wanting trim installed in his windshield rubber. How did the factory address the issue of the trim connectors? Since they typically are centered, but the at the center is the bend and the connector is straight. Photos would be great.
thanks
ed
klasse356
Re: Bent window trim & connector
Posted: Wed Apr 11, 2018 10:53 am
by Daryl Bertram
Hi Ed...here's the trim on '54 Cab 60441 with original cracked windshield. The top trim is popping out a bit which affords a view of the connection.
Re: Bent window trim & connector
Posted: Wed Apr 11, 2018 11:18 am
by Daryl Bertram
This is '53 Coupe 50502 with original windshield. The top trim is popped out slightly a bit like the Cab.
Re: Bent window trim & connector
Posted: Wed Apr 11, 2018 4:47 pm
by E Rutherford
Thanks the pictures are very helpful.
ed
Re: Bent window trim & connector
Posted: Wed Apr 11, 2018 6:16 pm
by Daryl Bertram
You're welcome.
