Recently had a 53 cab come into the shop wanting trim installed in his windshield rubber. How did the factory address the issue of the trim connectors? Since they typically are centered, but the at the center is the bend and the connector is straight. Photos would be great.
thanks
ed
klasse356
Bent window trim & connector
- Daryl Bertram
- 356 Fan
- Posts: 244
- Joined: Fri Oct 07, 2011 11:54 pm
- Location: San Diego, Ca
Re: Bent window trim & connector
Hi Ed...here's the trim on '54 Cab 60441 with original cracked windshield. The top trim is popping out a bit which affords a view of the connection.
- Daryl Bertram
- 356 Fan
- Posts: 244
- Joined: Fri Oct 07, 2011 11:54 pm
- Location: San Diego, Ca
Re: Bent window trim & connector
This is '53 Coupe 50502 with original windshield. The top trim is popped out slightly a bit like the Cab.
-
- 356 Fan
- Posts: 348
- Joined: Tue Oct 26, 2010 2:21 pm
Re: Bent window trim & connector
Thanks the pictures are very helpful.
ed
ed
- Daryl Bertram
- 356 Fan
- Posts: 244
- Joined: Fri Oct 07, 2011 11:54 pm
- Location: San Diego, Ca
Re: Bent window trim & connector
You're welcome.