Page 2 of 2
Re: Early 356A turn signal relay location
Posted: Mon Apr 02, 2018 12:50 pm
by Jim Hohensee
Joroen, Joris is right. I think that the metal bracket that we both have is a universal mounting bracket for turn signal flashers. If you look on e-bay there are several of the same bracket for sale. A customers car has also been converted with the same installation including the wiring change to push on connectors.
Jim
.
Re: Early 356A turn signal relay location
Posted: Mon Apr 02, 2018 4:06 pm
by James Davies
This is the early Hella flasher, used on all bent-window pre-A cars as far as I know.
Re: Early 356A turn signal relay location
Posted: Tue Apr 10, 2018 6:27 am
by David Nicholls
This was in my April '56 Coupe.
Re: Early 356A turn signal relay location
Posted: Wed Apr 11, 2018 7:16 am
by Peter Boettcher
This is the unit that is installed in my March of 55 Pre A if that helps at all.
As a side note, is there anyone out there that can repair one of these?
See you at Hershey Spots B50, 51, 52, and 53!
Peter Boettcher
Re: Early 356A turn signal relay location
Posted: Wed Apr 11, 2018 11:33 am
by Jeroen van der Velden
David Nicholls wrote:This was in my April '56 Coupe.
Thanks a lot for the picture and information.
I am going to search for one like this.
Re: Early 356A turn signal relay location
Posted: Tue Aug 28, 2018 1:16 pm
by Ned Gorski
looks just like the 4 post blinker on from my 55 cab . its common for the spring to let go . give it a shake if it rattles its a easy fix open it up and replace the spring . i got my replacement spring from the local hardware store . from what i was told any 6v 4 post cube will work . you can use a 3 post but i cant recall how it should be wired .
Regards Ned
55 cab