Page 1 of 1

Correct bolt for oil filter strap 64c

Posted: Fri Mar 23, 2018 10:37 pm
by Dave Whittick
Could somebody post a picture or describe the correct head markings/dimensions for the proper bolt for the oil filter strap on my 64?

Re: Correct bolt for oil filter strap 64c

Posted: Fri Mar 23, 2018 11:58 pm
by Greg Bryan
See line number 113 in spreadsheet
This is what was on my 6/64 SC Cab but I believe the bolt could have markings from any of the regular suppliers.

Re: Correct bolt for oil filter strap 64c

Posted: Sat Mar 24, 2018 12:50 am
by Mike Wilson
Greg is correct as verified by by the parts manual. I've seen Verbus, Karro and Kamax bolts used. Per the parts manual: M8x45 DIN 931-8G.

Mike

Re: Correct bolt for oil filter strap 64c

Posted: Sat Mar 24, 2018 12:31 pm
by Dave Whittick
Thanks for the help guys. Always learning. That spreadsheet is a great resource.

Now that I have your attention, do either of your recognize this bolt?
Image
Image

Re: Correct bolt for oil filter strap 64c

Posted: Sat Mar 24, 2018 3:58 pm
by Greg Bryan
That looks like a homemade version of the no. 4 bearing location bolt

Re: Correct bolt for oil filter strap 64c

Posted: Sat Mar 24, 2018 4:01 pm
by Greg Bryan
I say home made because it appears to be ground on a bench grinder but it may only be the photo
The manufacturer of the one I’m holding is Ribe