Page 1 of 1
356 AT1 parking brake cable tube
Posted: Sun Dec 10, 2017 1:23 pm
by pascal knockaert
Anyone knows where I can get it?
Re: 356 AT1 front transmission clutch cable tube
Posted: Tue Dec 12, 2017 8:37 am
by Vic Skirmants
That's for the parking brake.
Glad to see you changed the title; maybe someone will now help.
I think I remember that somebody once made one for his own car?
Re: 356 AT1 front transmission clutch cable tube
Posted: Wed Dec 13, 2017 7:33 am
by pascal knockaert
Thanks Vic, do you know where I can get it?
Re: 356 AT1 parking brake cable tube
Posted: Fri Dec 22, 2017 2:36 pm
by pascal knockaert
No one?
Re: 356 AT1 parking brake cable tube
Posted: Sun Dec 24, 2017 3:42 pm
by Roy Smalley
I have one....just need a couple of days to find it.
Re: 356 AT1 parking brake cable tube
Posted: Mon Dec 25, 2017 12:25 pm
by JERRY LANDES
I think that Trevor (Trevor's Hammer Works) maybe has made the tooling to make these for his bulkheads. I talked to him when looking for one and he mentioned that the tooling was complicated so they might not be cheap. These tubes are often bad or gone entirely. Maybe we could talk him into making a run of these. I know that I'b buy a couple just to put away.
Re: 356 AT1 parking brake cable tube
Posted: Tue Dec 26, 2017 1:02 pm
by Doug McDonnell
You might try Adam also. It is a fairly complicated piece that goes through at an angle and inside the front tunnel area is welded to two mounts-at least on my C coupe. Some info here:
viewtopic.php?f=1&t=28845&hilit=front+bulkhead