I have two 17/19 Hazet wrenches, one with a capital A and one with the small a.
Which year tool kit would they be in?
Hazet wrench
-
- 356 Fan
- Posts: 1090
- Joined: Sat Mar 29, 2008 1:18 pm
- Location: Roseburg, OR
- Mike Wilson
- Classifieds Monitor
- Posts: 11491
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Hazet wrench
John: if you go to "356tool.com" and check out the pics of the wrenches, you might be able to see the differences.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Charles H Jacobus
- 356 Fan
- Posts: 493
- Joined: Wed May 28, 2014 5:02 pm
- Location: Dallas, TX
Re: Hazet wrench
Is it 356tools.com you were referring to with an s, Mike?
ChuckJ
ChuckJ
Current:
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
- Mike Wilson
- Classifieds Monitor
- Posts: 11491
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Hazet wrench
Good catch, Chuck. Yes, it is tools with an "s".
Thanks,
Mike
Thanks,
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Charles H Jacobus
- 356 Fan
- Posts: 493
- Joined: Wed May 28, 2014 5:02 pm
- Location: Dallas, TX
Re: Hazet wrench
Nice site.
ChuckJ
ChuckJ
Current:
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
-
- 356 Fan
- Posts: 1090
- Joined: Sat Mar 29, 2008 1:18 pm
- Location: Roseburg, OR
Re: Hazet wrench
For info, received a reply from Eric, apparently the older wrench was used in tool kits up to the mid-50's.
Thanks, Eric (eric@356a.com)
Thanks, Eric (eric@356a.com)
- James Davies
- 356Talk Moderator
- Posts: 2951
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: Hazet wrench
Were the wrenches with the sizes embossed into the square area used in 356 tool kits? The certainly were not used in the early-to-mid 50s ones. For the ones in Porsche kits, the sizes were stamped in after the wrench was forged.
- Rick Albro
- 356 Fan
- Posts: 330
- Joined: Thu Mar 27, 2008 12:57 am
Re: Hazet wrench
John, The only Hazet wrenches with the cast in numbers used in PORSCHE tool kits was the 8 9 starting with the late A's James is right that this style was not in the early tools kits prior to about mid to late 57. The second or lower wrench that you show has a small a and an under line "L". You do not show the front side of this wrench. The finish appears to be nickel... nickel has a yellowish tint when viewed against a white piece of paper. The numbers on the other side of the wrench could be helpful in further identifying what you have. There are round fonts and square fonts, there are large number and small numbers, there are symmetrical and asymmetrical heads. The "L" wrenches were used up to about 1956. Large font numbers are generally associated with early production mostly likely pre 55, this is not well documented. During the 1950's Hazet produced wrenches with burnished, nickel or chrome finishes, but the wrenches used in the Porsche tool kits were nickel finished mostly during the pre A era and later chrome finished. Dull grey finishes were likely burnished whereas slightly yellow finishes were nickel. The chrome plated finishes started showing up in 356 tool kits around 1955-56. There have been several threads discussing this topic previously. Often tool kits were lost or are incomplete so definitive answers are based on consensus rather than direct observation. Alan Hall gives a good description of how tool kits were not necessarily place in cars at the factory but some at the dealer or at any other point in the process from the factory to the first owner. Most of the early accounts and descriptions do not notice the fine details that these wrenches are rich in.
In the below link Alan Buchert gives a link the the Hazet web site that has a wonderful posting of the early catalog for their wrenches.
viewtopic.php?f=21&t=41806
In the below link Alan Buchert gives a link the the Hazet web site that has a wonderful posting of the early catalog for their wrenches.
viewtopic.php?f=21&t=41806