Page 1 of 1
Trying to source correct garnish rail sheet metal phylipps s
Posted: Sun May 14, 2017 10:42 am
by Steve Raucher
I got these small screws from Auto's Int'l. For top door garnish rail Speedster. My screws are wider and longer. about 5mm in size, sheet metal have a hard time sourcing four Phillips head screws.
Any suggestions on a vendor where I can get these?
Thank you,
Steve
Re: Trying to source correct garnish rail sheet metal phylip
Posted: Sun May 14, 2017 11:16 am
by Jeffrey Leeds
You might find what you are looking for here at Belmertic:
https://www.belmetric.com/39mm-c-10_97_100/
Re: Trying to source correct garnish rail sheet metal phylip
Posted: Sun May 14, 2017 11:45 am
by Martin Benade
Stoddard doesn't have them? They probably do, in stainless.
Re: Trying to source correct garnish rail sheet metal phylip
Posted: Mon May 15, 2017 1:56 pm
by Steve Raucher
Thanks Jeff and Martin,
Stoddard says Porsche has no part # for such item .
I remembered there's a great place not far from my home.
They have a great selection of all things metric; nuts,bolts,screws and much more.
Global Metric in Belmont,CA # 650 592-2722.