I got these small screws from Auto's Int'l. For top door garnish rail Speedster. My screws are wider and longer. about 5mm in size, sheet metal have a hard time sourcing four Phillips head screws.
Any suggestions on a vendor where I can get these?
Thank you,
Steve
Trying to source correct garnish rail sheet metal phylipps s
- Steve Raucher
- 356 Fan
- Posts: 772
- Joined: Sat Jan 09, 2010 9:58 am
- Location: Seaside CA 93955
-
- 356 Fan
- Posts: 1280
- Joined: Sun Apr 20, 2008 4:57 pm
- Location: Northeastern MA
Re: Trying to source correct garnish rail sheet metal phylip
You might find what you are looking for here at Belmertic:
https://www.belmetric.com/39mm-c-10_97_100/
https://www.belmetric.com/39mm-c-10_97_100/
< Jeff >
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
- Martin Benade
- 356 Fan
- Posts: 12390
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Trying to source correct garnish rail sheet metal phylip
Stoddard doesn't have them? They probably do, in stainless.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- Steve Raucher
- 356 Fan
- Posts: 772
- Joined: Sat Jan 09, 2010 9:58 am
- Location: Seaside CA 93955
Re: Trying to source correct garnish rail sheet metal phylip
Thanks Jeff and Martin,
Stoddard says Porsche has no part # for such item .
I remembered there's a great place not far from my home.
They have a great selection of all things metric; nuts,bolts,screws and much more.
Global Metric in Belmont,CA # 650 592-2722.
Stoddard says Porsche has no part # for such item .
I remembered there's a great place not far from my home.
They have a great selection of all things metric; nuts,bolts,screws and much more.
Global Metric in Belmont,CA # 650 592-2722.