Could some one please clarify for me which is the correct "squirter" - I have two sizes - see picture - one is slightly taller than other.
Either way I am hoping that that one of them will be correct for my '57 coupe !
And secondly - is it possible to re-chrome the heads without blocking the small hole ?
Thanks
Hex squirter head size...
- Stephen Masefield
- 356 Fan
- Posts: 354
- Joined: Sat Dec 25, 2010 2:32 pm
- Location: Zion National Park, Virgin Utah
Hex squirter head size...
Steve
'57 Coupe
'61 Sunroof Coupe
'79 911SC Targa (Stupidly sold)
'23 Subaru BRZ (poor mans Porsche)
Ford Diesel to haul 'stuff'
'57 Coupe
'61 Sunroof Coupe
'79 911SC Targa (Stupidly sold)
'23 Subaru BRZ (poor mans Porsche)
Ford Diesel to haul 'stuff'
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Hex squirter head size...
I'm sorry I can't help you identify the two types of nozzles but a good chrome shop can plate without plugging the hole.
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Stephen Masefield
- 356 Fan
- Posts: 354
- Joined: Sat Dec 25, 2010 2:32 pm
- Location: Zion National Park, Virgin Utah
Re: Hex squirter head size...
Thanks Mike that's reassuring - someone on a PM told me the longer heads are A and shorter are pre-A ....so now need one or two reasonable shorter (hex head part) ones !
Last edited by Stephen Masefield on Thu Jan 05, 2017 7:02 pm, edited 1 time in total.
Steve
'57 Coupe
'61 Sunroof Coupe
'79 911SC Targa (Stupidly sold)
'23 Subaru BRZ (poor mans Porsche)
Ford Diesel to haul 'stuff'
'57 Coupe
'61 Sunroof Coupe
'79 911SC Targa (Stupidly sold)
'23 Subaru BRZ (poor mans Porsche)
Ford Diesel to haul 'stuff'
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Hex squirter head size...
Knowing how helpful our 356 community is, I'm sure someone will be helping you locate the ones you need.
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
-
- 356 Fan
- Posts: 4205
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Hex squirter head size...
Anyone have definite proof (observations/documentation) which jets were used on which car/year ? --- before we go out and manufacture the wrong one(s) ! These jets were "universal" parts to fit a number of vehicles, hence the long threads and shafts. So which ones were used on early 356s? See photo below for comps, A/B/C.