ventilator housing/ sheet metal/ engine tin
- Bil Brown
- 356 Fan
- Posts: 907
- Joined: Thu Mar 27, 2008 12:36 pm
- Location: Lincoln, NE
Re: ventilator housing/ sheet metal/ engine tin
Helge......I mailed the parts today. Good Luck with the project, and keep us updated.......Bill
Bill Brown
- Helge Tielker
- 356 Fan
- Posts: 243
- Joined: Fri May 09, 2008 2:49 pm
- Location: The Netherlands/ Rotterdam area
- Instagram: www.instagram.com/helge356/
- Contact:
Re: ventilator housing/ sheet metal/ engine tin
Bill,
once more thanks to your generosity.
Bjørn (my son)
1.) started sandblasting all the parts
2.) actual he has grounded all parts and ...
3.) did a try on one piece with a heatsresistant black color in moms oven .... 1 hour a t 160 degrees
..... he likes the non shiny look more than powdercoated (even it is not "Original") .... pics will follow after our holiday ...
cheers from the canarian islands (holiday)
once more thanks to your generosity.
Bjørn (my son)
1.) started sandblasting all the parts
2.) actual he has grounded all parts and ...
3.) did a try on one piece with a heatsresistant black color in moms oven .... 1 hour a t 160 degrees
..... he likes the non shiny look more than powdercoated (even it is not "Original") .... pics will follow after our holiday ...
cheers from the canarian islands (holiday)
356 B Coupe 12/59 ruby red/ black
"REDMAXX"
356 C Coupe 64 BaliBlue
(under restoration)
"REDMAXX"
356 C Coupe 64 BaliBlue
(under restoration)