Interesting 546 engine on ebay
- Mark Cohn
- 356 Fan
- Posts: 292
- Joined: Wed Mar 26, 2008 6:29 pm
- Location: Central Texas
Interesting 546 engine on ebay
I have never seen a flip top oil filler like this on a two piece case engine. Was this a factory part?
- Martin Benade
- 356 Fan
- Posts: 12390
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Interesting 546 engine on ebay
To add another question, is that a VW crank pulley? It looks like a mixture of parts, I see carb heat holes on the lower air channels, not a 2-pc case part.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- Mark Cohn
- 356 Fan
- Posts: 292
- Joined: Wed Mar 26, 2008 6:29 pm
- Location: Central Texas
Re: Interesting 546 engine on ebay
Regarding the heater boxes, they look like three piece case parts. Another part I wasn't aware could fit on a two pice case engine.
No doubt this engine has an interesting history!
No doubt this engine has an interesting history!
- James Davies
- 356Talk Moderator
- Posts: 2959
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: Interesting 546 engine on ebay
Porsche started using those oil filler/breathers on the 546/2 engines. Much of the rest of the stuff on the engine looks like it was pulled from a 356A T1, including the shroud and full intake system. And yeah, not a Porsche pulley.
And the engine is a restamp, not an original factory-built engine. The crankcase is from 1956 or later based on the casting details.
And the engine is a restamp, not an original factory-built engine. The crankcase is from 1956 or later based on the casting details.