Turn signal wedges

For those who obsess about exactly how their 356 left the factory!
Message
Author
User avatar
Spencer Harris
356 Fan
Posts: 1149
Joined: Thu Mar 27, 2008 12:39 pm
Location: San Joaquin Valley, California

Re: Turn signal wedges

#16 Post by Spencer Harris »

James Davies wrote:Spencer, your collection of Kxxxx numbers (3215, 3204 and 1485) looks like it came off a pre-A. K3215 up front (dual pole) and 3204 (dual) and 1485 (single) at the back.
The measurements are from my '53 and '55 plus a '56 set I bought last year and a bunch of spares. I compiled a database of measurements when I had them re-chromed and was simply verifying Brad's comments that the 2665 bezels are indeed thicker - or taller than the earlier beehive bezels. (The No# that is 12.8 mm was re-chromed years ago, and I suspect it was originally a 2665 too.
K1485 11.0mm
K1485 11.0mm
K1485 11.0mm
K1485 11.0mm
K1485 11.0mm
K3204 10.6mm
K3204 11.0mm
K3204 11.0mm
K3204 11.0mm
K3215 11.0mm
K3215 11.0mm
K3215 11.0mm
K3215 11.0mm
K3215 11.0mm
K3215 11.0mm
No # 12.8mm
No # 11.0mm
No # 10.8mm
No # 10.8mm
No # 11.0mm
No # 10.9mm
Spencer Harris
San Joaquin Valley, CA.

Post Reply