Hi, I am putting back together my 65 SC motor and I could use a good picture or pictures of the motor preferably out of the car showing correct colors and plating's of the different parts. I want to try and make the motor as correct as possible. I bought the fan shroud paint from Stoddards so I know I got that right.
Thanks!
PS. The motor is going back in a 1965 SC that was special ordered in Dolphin Gray, with speedster trim, ventilated chrome rims, tinted windsheild, dunlop tires, blue leatherette.
Need picture of 65 SC motor
- michael rogers
- 356 Fan
- Posts: 213
- Joined: Thu Mar 05, 2009 12:04 pm
- Location: CA
- Contact:
Need picture of 65 SC motor
Michael Rogers
55' 356 Pre-A
55' 356 Pre-A
- michael rogers
- 356 Fan
- Posts: 213
- Joined: Thu Mar 05, 2009 12:04 pm
- Location: CA
- Contact:
- Bob Cannon
- 356 Fan
- Posts: 168
- Joined: Thu Mar 27, 2008 12:48 am
- Location: Sacramento, CA
Re: Need picture of 65 SC motor
Here is a picture of an SC engine, done correctly, with a couple of minor exceptions: Weber carbs and sport muffler. I can send you additional details if needed. The metal is cad plated and clear coated with Eastwood's satin Diamond Clear for metal. Hope this helps.
- Attachments
-
- This picture also shows an additional spring added to the back for the fan shroud as a carb return spring.
- IMG_0244.jpg (180.08 KiB) Viewed 1411 times
-
- IMG_0243.jpg (170.98 KiB) Viewed 1411 times
-
- IMG_0242.jpg (170.75 KiB) Viewed 1411 times
Bob Cannon
Sacramento, CA
Sacramento, CA
- michael rogers
- 356 Fan
- Posts: 213
- Joined: Thu Mar 05, 2009 12:04 pm
- Location: CA
- Contact:
Re: Need picture of 65 SC motor
Bob, you are the man!!!!
Hey I don't know if you know about the Nor Cal Treffen but you should come for sure!
www.norcalvintagevwandporschetreffen.com
Thanks again
Hey I don't know if you know about the Nor Cal Treffen but you should come for sure!
www.norcalvintagevwandporschetreffen.com
Thanks again
Michael Rogers
55' 356 Pre-A
55' 356 Pre-A