Correct bolt for oil filter strap 64c
-
- 356 Fan
- Posts: 376
- Joined: Wed May 10, 2017 4:14 pm
Correct bolt for oil filter strap 64c
Could somebody post a picture or describe the correct head markings/dimensions for the proper bolt for the oil filter strap on my 64?
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: Correct bolt for oil filter strap 64c
See line number 113 in spreadsheet
This is what was on my 6/64 SC Cab but I believe the bolt could have markings from any of the regular suppliers.
This is what was on my 6/64 SC Cab but I believe the bolt could have markings from any of the regular suppliers.
- Attachments
-
- Porsche Nuts and Bolts.xls
- (47.5 KiB) Downloaded 883 times
Greg Bryan
- Mike Wilson
- Classifieds Monitor
- Posts: 11621
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Correct bolt for oil filter strap 64c
Greg is correct as verified by by the parts manual. I've seen Verbus, Karro and Kamax bolts used. Per the parts manual: M8x45 DIN 931-8G.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
-
- 356 Fan
- Posts: 376
- Joined: Wed May 10, 2017 4:14 pm
Re: Correct bolt for oil filter strap 64c
Thanks for the help guys. Always learning. That spreadsheet is a great resource.
Now that I have your attention, do either of your recognize this bolt?
Now that I have your attention, do either of your recognize this bolt?
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: Correct bolt for oil filter strap 64c
That looks like a homemade version of the no. 4 bearing location bolt
Greg Bryan
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: Correct bolt for oil filter strap 64c
I say home made because it appears to be ground on a bench grinder but it may only be the photo
The manufacturer of the one I’m holding is Ribe
The manufacturer of the one I’m holding is Ribe
Greg Bryan