I need figure 7-10

356 Porsche-related discussions and questions.
Post Reply
Message
Author
User avatar
David Aronson
356 Fan
Posts: 114
Joined: Mon Nov 24, 2014 12:58 pm
Location: Vacaville, Ca
Contact:

I need figure 7-10

#1 Post by David Aronson » Tue Sep 10, 2019 4:42 pm

Hey all,
My parts Katalog is missing pages 7-10 1-10. I am installing my front horn grills (below bumper). I am struggling with all the parts. Could someone take a picture of the diagram page 7-10.
Thanks
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
83 911SC
64 VW coupe
Vacaville Ca.

User avatar
Mike Wilson
356 Fan
Posts: 4757
Joined: Tue Apr 15, 2008 4:37 pm
Location: SW Los Angeles

Re: I need figure 7-10

#2 Post by Mike Wilson » Tue Sep 10, 2019 8:15 pm

David: I found a diagram and a link to a previous 356 Talk thread by Googling "356 Porsche horn grill". I know there are a lot of pieces but it is fairly straight forward on first assembling the rubber buffers and aluminum strips and bolts on the grills then inserting the aluminum strips through the holes in the body. They are held in place on the inside of the body by the somewhat crescent-shaped metal plates. The strips go through these plates and are folded over holding the grills in place.

Mike
Mike Wilson
Lomita, CA
'63 B coupe

User avatar
Ron LaDow
356 Fan
Posts: 6486
Joined: Wed Mar 26, 2008 11:45 am
Location: San Francisco

Re: I need figure 7-10

#3 Post by Ron LaDow » Tue Sep 10, 2019 8:21 pm

Opened the thread imagining it was some take-off on the old joke about the tyro at the parts store trying to buy the "710" cap: "OIL" upside-down
Ron LaDow
www.precisionmatters.biz

User avatar
Mike Wilson
356 Fan
Posts: 4757
Joined: Tue Apr 15, 2008 4:37 pm
Location: SW Los Angeles

Re: I need figure 7-10

#4 Post by Mike Wilson » Tue Sep 10, 2019 8:49 pm

Ah, yes, the elusive 710 cap..."rare, James Dean, Carrera, Speedster..."

Mike
Mike Wilson
Lomita, CA
'63 B coupe

User avatar
David Aronson
356 Fan
Posts: 114
Joined: Mon Nov 24, 2014 12:58 pm
Location: Vacaville, Ca
Contact:

Re: I need figure 7-10

#5 Post by David Aronson » Tue Sep 10, 2019 10:06 pm

Would be nice to see where that rubber piece goes.
61 Karmann Notchback 200831
67 Karman 912 461567
74 911 Targa
83 911SC
64 VW coupe
Vacaville Ca.

User avatar
Mike Wilson
356 Fan
Posts: 4757
Joined: Tue Apr 15, 2008 4:37 pm
Location: SW Los Angeles

Re: I need figure 7-10

#6 Post by Mike Wilson » Tue Sep 10, 2019 11:38 pm

The small rubber pieces go onto the edges of the grill slats. The thin aluminum strips go through the rubber pieces and the slats then exit through the holes in the car to be attached with the metal plates.

Mike
Mike Wilson
Lomita, CA
'63 B coupe

User avatar
Mike Wilson
356 Fan
Posts: 4757
Joined: Tue Apr 15, 2008 4:37 pm
Location: SW Los Angeles

Re: I need figure 7-10

#7 Post by Mike Wilson » Wed Sep 11, 2019 12:19 am

I took some pics of the lower grills. PM me with your email address and I will send them to you. Sorry I am computer-inept and don't know how to post them here.

Mike
Mike Wilson
Lomita, CA
'63 B coupe

Post Reply