Engine Spray Can Color Match Samples

356 Porsche-related discussions and questions.
Post Reply
Message
Author
User avatar
Dennis Vogel
356 Fan
Posts: 176
Joined: Sat Oct 25, 2008 6:10 pm
Location: Santa Rosa, CA
Contact:

Engine Spray Can Color Match Samples

#1 Post by Dennis Vogel » Wed Aug 14, 2019 6:40 pm

Following my efforts to color match powder coat samples, I've now taken a run at spray cans. This to hit the oil filter canister and oil filler can which are cautioned against powder coat.

Perhaps it’s no surprise, Stoddard Filter Canister Silver offering is quite a good match.
OilFilterCannister-SprayCan-ColorMatchesLighting.jpg
OilFilterCannister-SprayCan-ColorMatchesLighting.jpg (410.92 KiB) Viewed 81 times
My luck was not as good on the black, despite trying several recommended offerings. Best I found was Eastwood Original Chassis Black Gloss. I think it's a bit too glossy. Vic had referenced a semi-gloss from them, but I don't see it as currently available.
EngineTinBlack-SprayCan-ColorMatchesLighting.jpg
EngineTinBlack-SprayCan-ColorMatchesLighting.jpg (372.73 KiB) Viewed 81 times
More details on my blog for anyone interested.
1960 356 S90 Sunroof Coupe
2014 Carrera S

User avatar
Vic Skirmants
356 Registry Member
Posts: 7011
Joined: Tue Oct 27, 2009 5:02 pm
Location: SE Michigan

Re: Engine Spray Can Color Match Samples

#2 Post by Vic Skirmants » Thu Aug 15, 2019 8:32 am

Eastwood calls it Satin Black. I use that on axle tubes and backing plates. Might be a bit too flat for engine metal. I do use the Gloss for engine bits.

User avatar
Joris Koning
356 Fan
Posts: 1741
Joined: Tue Mar 25, 2008 5:34 pm

Re: Engine Spray Can Color Match Samples

#3 Post by Joris Koning » Thu Aug 15, 2019 8:41 am

I have recently started to use 2K cans. Not sure if they are available over there. We have a place here who for a fee colors matches them. Way more durable than regular 1K cans.

Might be something for you to look into.
'56 Coupe
'57 Coupe
'59 Cab 
'60 Coupe

Post Reply