Page 1 of 1
bumper deco bolts
Posted: Sat Aug 10, 2019 2:13 pm
by paul vantol
Anyone know of a source for the T bolts used to hold the bumper deco strips on the bumpers?
Re: bumper deco bolts
Posted: Sat Aug 10, 2019 3:11 pm
by Steve Hatfield
Stoddard; under bumpers sells individual bumper deco t bolts and kits for side deco strips
Re: bumper deco bolts
Posted: Sat Aug 10, 2019 3:23 pm
by paul vantol
All I saw on their web site were kits for 1973 and newer.....
Re: bumper deco bolts
Posted: Sat Aug 10, 2019 3:46 pm
by JohnPierce
I used M5 x 16mm carriage bolts mushroom/round top stainless steel for bumper deco strips. If you have a round hole, use a small file to make it square so the neck of the bolt fits to prevent it from turning.
https://www.mscdirect.com/product/detai ... m=02122869
The "T" bolts don't fit well.
https://www.ebay.com/itm/25-50pcs-20-Se ... 2749.l2649
HTH.
JP
- IMG_9488.jpeg (3.1 MiB) Viewed 520 times
- 512AdzoRYEL._SL1001_.jpg (54.85 KiB) Viewed 519 times
Re: bumper deco bolts
Posted: Sat Aug 10, 2019 4:32 pm
by Tom Scott
It should be noted that the hardware for bumper and rocker decos (all years) supplied by Stoddard are not metric and should be changed. The stove bolts described above are available from any metric supplier.
Also, the rocker bolts for 356 A are M6 X 16. All bumper and rocker deco hardware should include a flat and lock washer.
Tom
Re: bumper deco bolts
Posted: Sat Aug 10, 2019 6:13 pm
by Martin Benade
I thought they were now metric, at least on bumper decos (B) although I may be remembering wrong.
Re: bumper deco bolts
Posted: Sat Aug 10, 2019 7:34 pm
by Mike Wilson
I obtained the correct metric bolts from both McMaster Carr and Belmetric. Metric Multistandard probably carries them as well.
Mike