Need help on the installation of an A horn ring.
I have the kit from Stoddard but no instructions on the sequence of installation, and my shop manual does not show it.
Could not find it on the resource section.
John
Installing horn ring
-
- 356 Fan
- Posts: 1101
- Joined: Sat Mar 29, 2008 1:18 pm
- Location: Roseburg, OR
- Jim Liberty
- 356 Registry Member
- Posts: 4320
- Joined: Tue May 06, 2008 3:47 pm
- Tag: Jim
- Location: Orange Co., CA
- Contact:
Re: Installing horn ring
John, is not complicated. You must isolate the ring from any ground. That is what the rubber ring is for. Adjusting the ring so it will ground is the tricky part. There must be someone in the group that has pictures. …...Jim.
Jim Liberty
-
- 356 Fan
- Posts: 1101
- Joined: Sat Mar 29, 2008 1:18 pm
- Location: Roseburg, OR
Re: Installing horn ring
Hi Jim
Pictures would be great, since there are two rubber rings and a number of other pieces.
John
Pictures would be great, since there are two rubber rings and a number of other pieces.
John
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Re: Installing horn ring
I wrestled with this one a couple of years ago. These pics might help a little.
viewtopic.php?t=687
viewtopic.php?t=31607
viewtopic.php?t=39226
viewtopic.php?t=687
viewtopic.php?t=31607
viewtopic.php?t=39226
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
-
- 356 Fan
- Posts: 1101
- Joined: Sat Mar 29, 2008 1:18 pm
- Location: Roseburg, OR
Re: Installing horn ring
Thanks all, the pics really help.
jOHN
jOHN