Upholstery Kit Resources - 356 T5
- Ken Tuvman
- 356 Fan
- Posts: 867
- Joined: Sun Mar 17, 2019 10:22 pm
- Location: Lake Minnetonka MN
Upholstery Kit Resources - 356 T5
I want to get the front seats re-upholstered and found a shop here in MN that I'm comfortable working with. Existing seats were re-covered - planning to take seats to upholsterer and let him tell me if I need to buy new interior hardware for seat backs and bottoms.
Here's (3) possible resources for upholstery and bottom and back innards kits:
1) World Upholstery & Trim
2) Mr. Fiat
3) GAHH
Wondering if anyone here has used one and what your recommendations are.
Thank You,
Ken
Here's (3) possible resources for upholstery and bottom and back innards kits:
1) World Upholstery & Trim
2) Mr. Fiat
3) GAHH
Wondering if anyone here has used one and what your recommendations are.
Thank You,
Ken
Author / Photojournalist
- Emil Wojcik
- 356 Fan
- Posts: 1528
- Joined: Tue Mar 25, 2008 7:20 pm
- Location: Metuchen, NJ
Re: Upholstery Kit Resources - 356 T5
I used Autos International after many recommendations from Registry members and am very happy. They are a longtime registry vendor. Here's their site: http://www.porschetopsandinteriors.net/
Emil Wojcik
'64 356C Euro coupe
'78 MGB
'86 Jaguar XJ6 Series 3
'94 MB E420
'64 356C Euro coupe
'78 MGB
'86 Jaguar XJ6 Series 3
'94 MB E420
- Jim Liberty
- 356 Registry Member
- Posts: 4320
- Joined: Tue May 06, 2008 3:47 pm
- Tag: Jim
- Location: Orange Co., CA
- Contact:
Re: Upholstery Kit Resources - 356 T5
Autos International or K&H, both here in So. Cal. ………………...Jim.
Jim Liberty
- Spencer Harris
- 356 Fan
- Posts: 1149
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: San Joaquin Valley, California
Re: Upholstery Kit Resources - 356 T5
Tony GarciaKen Tuvman wrote: ↑Tue Mar 19, 2019 1:36 pmWondering if anyone here has used one and what your recommendations are. Ken
AUTOBAHN INTERIORS
San Diego
https://www.autobahninteriors.com/
Spencer Harris
San Joaquin Valley, CA.
San Joaquin Valley, CA.
-
- 356 Fan
- Posts: 2506
- Joined: Thu Mar 27, 2008 9:14 am
- Tag: Official curmudgeon
- Location: Ft Collins CO
Re: Upholstery Kit Resources - 356 T5
I've used Auto' International many times and you can't find a better cover, originality, and quality is perfect.
Leather or vinyl.
Leather or vinyl.
- Jules Dielen
- 356 Fan
- Posts: 3206
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Upholstery Kit Resources - 356 T5
I would not use Autobahn again. QC is down the drain.
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- George Hussey
- 356 Fan
- Posts: 757
- Joined: Tue Mar 24, 2009 12:22 pm
- Location: atlanta georgia
- Contact:
Re: Upholstery Kit Resources - 356 T5
I just ordered a new red vinyl interior from autos international for my roadster, impeccable work, they are also going to restore the used seat set I got from David Hugh, Thank you!
George Hussey
- Ken Tuvman
- 356 Fan
- Posts: 867
- Joined: Sun Mar 17, 2019 10:22 pm
- Location: Lake Minnetonka MN
- Bill Lawless
- 356 Fan
- Posts: 955
- Joined: Mon Oct 25, 2010 10:17 pm
- Location: Northern Vermont
Re: Upholstery Kit Resources - 356 T5
Sense your talking Upholstery, I have a question !!!!
The pleat in the seat.. What is the preferred way?
I believe the correct way is just a crease from being tied down in that area, Which even though correct doesn't look finished properly, a bit wrinkly..
Then, some of the good Upholstery shops mentioned above put a very pronounced molded 1/4+ pleat, looks better but not correct(or is it)
Then no pleat at all, I also think looks ok but not correct.. I also see no pleat on car selling for $165k+..
Bill
The pleat in the seat.. What is the preferred way?
I believe the correct way is just a crease from being tied down in that area, Which even though correct doesn't look finished properly, a bit wrinkly..
Then, some of the good Upholstery shops mentioned above put a very pronounced molded 1/4+ pleat, looks better but not correct(or is it)
Then no pleat at all, I also think looks ok but not correct.. I also see no pleat on car selling for $165k+..
Bill
Thanks,
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
- Emil Wojcik
- 356 Fan
- Posts: 1528
- Joined: Tue Mar 25, 2008 7:20 pm
- Location: Metuchen, NJ
Re: Upholstery Kit Resources - 356 T5
.
Two images of seat crease from Porsche literature of the day...
New upholstery with manufactured crease as supplied by Autos International...
As you can see, the Autos International (as well as others, I believe) that have the crease manufactured in place are more defined than the way the factory originally did them. I've seen quite a few where they try to get it right but the crease is far too 'soft' looking but you can fine some cars that get it exactly as original, I just couldn't find any images.
The Autos International covers make the job very easy for someone who plans on doing the job themselves, as I did (the photo of the Autos Int seats are of my car), but they are not really right for a concours car.
Two images of seat crease from Porsche literature of the day...
New upholstery with manufactured crease as supplied by Autos International...
As you can see, the Autos International (as well as others, I believe) that have the crease manufactured in place are more defined than the way the factory originally did them. I've seen quite a few where they try to get it right but the crease is far too 'soft' looking but you can fine some cars that get it exactly as original, I just couldn't find any images.
The Autos International covers make the job very easy for someone who plans on doing the job themselves, as I did (the photo of the Autos Int seats are of my car), but they are not really right for a concours car.
Emil Wojcik
'64 356C Euro coupe
'78 MGB
'86 Jaguar XJ6 Series 3
'94 MB E420
'64 356C Euro coupe
'78 MGB
'86 Jaguar XJ6 Series 3
'94 MB E420
- Paul Hatfield
- 356 Registry Member
- Posts: 1149
- Joined: Tue Mar 25, 2008 5:46 pm
- Location: Washington State
- Contact:
Re: Upholstery Kit Resources - 356 T5
Emil-
Great explanation of the photos!
Great explanation of the photos!
Paul Hatfield
"Miss April"
http://www.enginesinback.com
"Miss April"
http://www.enginesinback.com
- George Hussey
- 356 Fan
- Posts: 757
- Joined: Tue Mar 24, 2009 12:22 pm
- Location: atlanta georgia
- Contact:
Re: Upholstery Kit Resources - 356 T5
the lack of pleat instantly tells of a poor recovering job.
George Hussey
- Bill Lawless
- 356 Fan
- Posts: 955
- Joined: Mon Oct 25, 2010 10:17 pm
- Location: Northern Vermont
Re: Upholstery Kit Resources - 356 T5
Thanks Guys, That Autos Int pleat looks like they pressed a hot rod into it?? Looks pretty good though..
I have 3 cars.. None have pleats, maybe I have my fav redone..
But I'm seeing to nicely restored.. quite expensive cars for sale on ebay right now that do not have a pleat.. Guess they didn't get the memo!!
I have 3 cars.. None have pleats, maybe I have my fav redone..
But I'm seeing to nicely restored.. quite expensive cars for sale on ebay right now that do not have a pleat.. Guess they didn't get the memo!!
Thanks,
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
- Emil Wojcik
- 356 Fan
- Posts: 1528
- Joined: Tue Mar 25, 2008 7:20 pm
- Location: Metuchen, NJ
Re: Upholstery Kit Resources - 356 T5
Bill, my seats as shown in the photo are with the crease tied down from underneath as the originals would have been but I really should have tied them tighter to pull the crease down more. I think if I did, it would have looked a lot more like the first factory literature photo I posted above, although they still would have been too perfect. Not worth redoing to me since it's not a show car.
If I remember correctly, the Autos Int crease is created by not having the thin core of foam in the crease area. The rest of the covers have a thin layer of foam to give the covers shape.
If I remember correctly, the Autos Int crease is created by not having the thin core of foam in the crease area. The rest of the covers have a thin layer of foam to give the covers shape.
Emil Wojcik
'64 356C Euro coupe
'78 MGB
'86 Jaguar XJ6 Series 3
'94 MB E420
'64 356C Euro coupe
'78 MGB
'86 Jaguar XJ6 Series 3
'94 MB E420