Piston rings brand recommendations?
- Don Gale
- 356 Fan
- Posts: 1183
- Joined: Wed Jul 26, 2017 6:27 pm
- Tag: Black A's Matter
- Location: Albuquerque
- Contact:
Piston rings brand recommendations?
It's time to hone & re-ring my 85.5 mm 1720 cc NPR big bore cyls. Any brands to use or avoid? Deves, Grant, ??
1958 356A 1600 Super Sunroof Coupe
former 1966 Euro 912 Sunroof
former 1978 Intermeccanica Speedster w/'68 912
Member Since 1983, #4039
"Nostalgia isn't what it used to be"
former 1966 Euro 912 Sunroof
former 1978 Intermeccanica Speedster w/'68 912
Member Since 1983, #4039
"Nostalgia isn't what it used to be"
- DonCichocki
- 356 Fan
- Posts: 522
- Joined: Thu Aug 22, 2013 4:29 pm
- Location: Lafayette, NJ
Re: Piston rings brand recommendations?
Wouldn't your type of pistons dictate that? I have JE pistons so use JE rings.
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Re: Piston rings brand recommendations?
My last set were Grant. They are fine so far.
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
- Don Gale
- 356 Fan
- Posts: 1183
- Joined: Wed Jul 26, 2017 6:27 pm
- Tag: Black A's Matter
- Location: Albuquerque
- Contact:
Re: Piston rings brand recommendations?
The last time I rebuilt it was 1975 with the Japanese "NPR" big bore set. I have long since forgotten what brand rings came with them. Would you know if JE uses the same rings? I haven't torn it down yet to verify the piston design. Just doing some preliminary research during my winter slumber and hope to hit it hard in the Spring.DonCichocki wrote: ↑Sun Feb 03, 2019 9:40 am Wouldn't your type of pistons dictate that? I have JE pistons so use JE rings.
1958 356A 1600 Super Sunroof Coupe
former 1966 Euro 912 Sunroof
former 1978 Intermeccanica Speedster w/'68 912
Member Since 1983, #4039
"Nostalgia isn't what it used to be"
former 1966 Euro 912 Sunroof
former 1978 Intermeccanica Speedster w/'68 912
Member Since 1983, #4039
"Nostalgia isn't what it used to be"
- Martin Benade
- 356 Fan
- Posts: 12381
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Piston rings brand recommendations?
And I was hoping to hear the answer too.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- DonCichocki
- 356 Fan
- Posts: 522
- Joined: Thu Aug 22, 2013 4:29 pm
- Location: Lafayette, NJ
Re: Piston rings brand recommendations?
Sorry, no clue.
- Wes Bender
- 356 Fan
- Posts: 4938
- Joined: Wed Aug 27, 2008 10:54 am
- Location: Somewhere in the Gadsden Purchase, USA
Re: Piston rings brand recommendations?
Considering the difference in rings for the various piston sets, I'd wait until teardown to see which rings you need.
Some days it's just not worth chewing through the restraints.....