Vendor for generator field coils?
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Vendor for generator field coils?
I was wondering if anybody knows of a vendor who sells field coils and perhaps field coil shoe screws. Its a 12 volt 25 amp 90 mm unit. I'll try and get them repaired local but I'm not too hopeful on that front.
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
- John Brooks
- 356 Fan
- Posts: 2174
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: Vendor for generator field coils?
Call Al Zim
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Re: Vendor for generator field coils?
Thanks John. I sent them an inquiry. I did pull the coils today (after drilling out the screws) and found a broken lead under the insulation. Its a couple inches after it exits the coil. I don't know whether its good practice or not to solder repair or not but I will look into it.
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Vendor for generator field coils?
There are also field coils occasionally offered on eBay as well.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Re: Vendor for generator field coils?
Zims doesn't carry them although their generator rebuilder might sell them....tba. There is nothing on Ebay I can find. I did find a couple of electrical companies that make them...Amsco Valley Forge and Dixie Electric although I haven't contacted them yet.
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
-
- 356 Fan
- Posts: 125
- Joined: Tue Apr 15, 2008 1:09 am
- Location: Sydney Australia
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Re: Vendor for generator field coils?
Thanks Peter but I'm looking for just the coils. Its a 12 volt 912 generator.
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
- Steve Hatfield
- 356 Fan
- Posts: 1035
- Joined: Wed Mar 26, 2008 8:54 am
Re: Vendor for generator field coils?
Try BNR parts in Van Neys, CA. They rebuild generators for many makes including 356/912 both 90 and 105 mm and sell field coils outright both over the phone and on eBay.
Sorry, I don’t have their number handy.
Sorry, I don’t have their number handy.
Steve Hatfield
Fort Walton Beach, FL
'63 S90 Sunroof Coupe
'06 997S Coupe
Fort Walton Beach, FL
'63 S90 Sunroof Coupe
'06 997S Coupe
-
- 356 Fan
- Posts: 125
- Joined: Tue Apr 15, 2008 1:09 am
- Location: Sydney Australia
Re: Vendor for generator field coils?
https://www.ebay.com.au/itm/Porsche-356 ... SwhKZZ0rN8
They have a complete set. Ask if they will sell you just what you require.
They have a complete set. Ask if they will sell you just what you require.
- Jacques Lefriant
- 356 Fan
- Posts: 4668
- Joined: Mon Dec 06, 2010 1:50 pm
- Location: Washoe county NV
Re: Vendor for generator field coils?
Hi
I have field coils and armatures they are reasonable but sending me the generator might be better
j
I have field coils and armatures they are reasonable but sending me the generator might be better
j
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Re: Vendor for generator field coils?
I sourced some from Dixie Electric although I had to buy through a local distributor who had no clue what a field coil was. They were pretty cheap. Unfortunately slotted pole screws have to come from China as McMaster Carr won't ship to me Hopefully my $130 rebuild works out.
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
- Ron LaDow
- 356 Fan
- Posts: 8100
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
Re: Vendor for generator field coils?
Like most of our vendors Pre Mat ships to Canada and tries to find the least expensive way to do so. But the bureaucratic costs involved in preparing and filing X copies of Y forms means orders under a certain value are not really 'doing business'.Matthew Devereux wrote:[...]Unfortunately slotted pole screws have to come from China as McMaster Carr won't ship to me Hopefully my $130 rebuild works out.
If you have the time, have McMaster send them to a supplier who is sending you other parts and they can put them in the shipment; win-win.
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz
- Matthew Devereux
- 356 Fan
- Posts: 1047
- Joined: Sun Nov 21, 2010 11:36 am
- Location: Alberta
Re: Vendor for generator field coils?
I did put together an order with a few more items. This is what they said " We are a business-to-business supplier of industrial goods. If this material is not for personal use, you may re-place your order with your business or school name." You learn something every day. I could have fibbed but their are other places to shop.
Matthew Devereux
'00 Boxster S
'58 356A coupe
'00 Boxster S
'58 356A coupe
- Ron LaDow
- 356 Fan
- Posts: 8100
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
Re: Vendor for generator field coils?
This must be recent.Matthew Devereux wrote:I did put together an order with a few more items. This is what they said " We are a business-to-business supplier of industrial goods. If this material is not for personal use, you may re-place your order with your business or school name."[...]
I bought from them for many years before starting Pre Mat.
It's easy to understand the resistance to the clerical costs of customs on a small order. It's harder to understand someone offering something for sale but only if...
Doesn't help their rep IMO.
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz
- Martin Benade
- 356 Fan
- Posts: 12392
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Vendor for generator field coils?
Sounds like they were suggesting how to bend the rules a bit.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna