Chrome platers
- Michael Moss
- 356 Fan
- Posts: 158
- Joined: Sat Apr 26, 2008 1:22 pm
- Location: Livermore, Ca
Chrome platers
Any recommendations for chrome plating? I would prefer to do business in the S.F. Bay Area, but I'm willing to ship my parts if someone has had a good experience somewhere else. I need the window frames replated along with the quarter window frames, latches, and some small misc parts. Mike
- Mike Wilson
- Classifieds Monitor
- Posts: 11633
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Chrome platers
Two platers I use in the Los Angeles area: Luis at Supreme Plating in Inglewood and Jose at Christensen's Plating in Vernon. I just had Luis do a pair of quarter window frames and latches and he previously did my door frames. They came out great. I refer to Christensen's as the Tiffany's of chrome work. He does excellent work on parts that have have more definition that needs to be retained. He is more expensive but well worth it.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Jay Wiener
- 356 Fan
- Posts: 574
- Joined: Thu May 31, 2012 1:27 am
- Location: Los Angeles
- Contact:
Re: Chrome platers
Mike, Christensen's used to be the best. They are very expensive now and you need to check all of their work.
- Alan Hall
- 356 Fan
- Posts: 1462
- Joined: Wed Mar 26, 2008 12:06 pm
- Location: Orinda, CA
Re: Chrome platers
Mike,
It has been a number of years now, but I was happy with the work done by Global Spec Plating. As I recall they were in either Hayward or Fremont. Seemed very professional and did a good job.
It has been a number of years now, but I was happy with the work done by Global Spec Plating. As I recall they were in either Hayward or Fremont. Seemed very professional and did a good job.
-
- 356 Fan
- Posts: 34
- Joined: Tue May 20, 2008 12:07 am
- Location: Northern California
- Contact:
Re: Chrome platers
Hi Mike,
Two platers I have used within the last five years:
1. ABC Plating in Sparks, Nevada. Good quality/prices. they do a lot of plating for custom cycles, and domestic hot rods.
2. Johnson Plating on Telegraph in Oakland. Small shop, I don't know how large of items they can handle. Fairly expensive.
Ralph
Two platers I have used within the last five years:
1. ABC Plating in Sparks, Nevada. Good quality/prices. they do a lot of plating for custom cycles, and domestic hot rods.
2. Johnson Plating on Telegraph in Oakland. Small shop, I don't know how large of items they can handle. Fairly expensive.
Ralph
-
- 356 Fan
- Posts: 1129
- Joined: Wed Apr 02, 2008 9:49 pm
- Location: Gilroy, CA
Re: Chrome platers
Mike, I have used Johnson's in Oakland for years, and they have always been good. I guess now that Superior in San Jose is finally closed, and some of the guys moved to Valley Plating, but reports that they aren't good enough for 356 parts. Also I have used Walkers Chrome, in Lake Shasta, but that was years ago, back when Grandpa ran the shop in Vacaville, 3rd generation family business.
ABC has done some work for others and reported as good.
AAA, and Sherms in Sacramento both have been good, and do a lot of Hot Rod work and they are cheaper than those in the Bay Area.
Inventory the parts, make sure that the details of each piece are written down on the list, such as the ridge on Areo mirror bases are to be left, make a brace to hold the window channels from warping. and a any of the SWF and K numbers may be wanted.
ABC has done some work for others and reported as good.
AAA, and Sherms in Sacramento both have been good, and do a lot of Hot Rod work and they are cheaper than those in the Bay Area.
Inventory the parts, make sure that the details of each piece are written down on the list, such as the ridge on Areo mirror bases are to be left, make a brace to hold the window channels from warping. and a any of the SWF and K numbers may be wanted.
- Rick Albro
- 356 Fan
- Posts: 330
- Joined: Thu Mar 27, 2008 12:57 am
Re: Chrome platers
Jose at Christensen's plating is the only choice if you want your plating to be right! How expensive is the work if the part is destroyed? If the part has to look good and meet high tolerance like door handle parts where the replacements are hard to find and expensive you want the plating to be right with out question. If the part does not matter how it looks or performs than who you choose does not matter. I have had good plating at other shops but Jose's work is unmatched when the plating counts. Some parts are less critical than others so choose according to what your needs are.
- Jim Alton
- 356 Fan
- Posts: 1772
- Joined: Sun Mar 30, 2008 12:11 pm
- Location: Los Angeles County
Re: Chrome platers
As long as we're debating Los Angeles area platers, I've always gone to:
Verne's Chrome Plating
1559 W El Segundo Blvd,
Gardena, CA 90249
(323) 754-4126
And, I will continue to take my work to Verne's
Verne's Chrome Plating
1559 W El Segundo Blvd,
Gardena, CA 90249
(323) 754-4126
And, I will continue to take my work to Verne's
Jim Alton
Los Angeles County, CA
1958 Porsche 356A Cabriolet
1965 Porsche 911 Coupé
1966 Volkswagen Type 2
2003 Porsche 986 Boxster
- Mike Wilson
- Classifieds Monitor
- Posts: 11633
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Chrome platers
I used to use Verne's until, after specifically telling them not to buff off the SWF on my front tyrn signsls, they did anyway and just shrugged when I sounded them about it. A friend and I priced chroming T-6 door frames getting estimates from Supreme, Christensen's and Verne's. Verne's was the highest then said it would be even more if we wanted the "Willhoit level". We went with Christensen's and they came out great.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: Chrome platers
I've used Christensen's and Verne's - I thought the Christensen's output was superior. The staff at Christenson's are very familiar with the 356 parts and, for example, showed me several areas that typically have cracks and, sure enough, mine were cracked. They repaired the parts before plating - the finished product was stunning - there's no other word. Verne's was good, but not at the same level, in my opinion.
Greg Bryan
- Michael Moss
- 356 Fan
- Posts: 158
- Joined: Sat Apr 26, 2008 1:22 pm
- Location: Livermore, Ca
Re: Chrome platers
As a follow up on the chrome platers, I took my parts to Global Plating in Fremont. Price was reasonable compared to others, and the parts turned out great! When I walked in with my parts the guy identifided them as Porsche parts without me saying anything. They were careful with the polishing at the corners ( not to round the tips ) of the quarter windows. Took a little time but great results. Mike
- Mike Wilson
- Classifieds Monitor
- Posts: 11633
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Chrome platers
Congrats, Mike, on getting a satisfactory job. We can add them to our list of good platers.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Tom Wavrin
- 356 Fan
- Posts: 471
- Joined: Fri Mar 28, 2008 1:39 am
- Location: Oregon
Chrome platers
Walker's Chrome in Shasta City, CA, closed shop at the end of 2017.
Tom, Reg # 10576, Oregon
'62 1600S Karmann HT
'62 1600S Karmann HT
- Ron LaDow
- 356 Fan
- Posts: 8094
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
Re: Chrome platers
In which state? Your profile offers no clue.Michael Moss wrote:As a follow up on the chrome platers, I took my parts to Global Plating in Fremont.
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz
- Ron LaDow
- 356 Fan
- Posts: 8094
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
Re: Chrome platers
Industrial Plating in San Carlos, CA did so about 6 months prior to that. One of the last shops in Nor Cal doing Cd plating. Yes, it's toxic, as are kidney beans, if you eat them improperly prepared:Tom Wavrin wrote:Walker's Chrome in Shasta City, CA, closed shop at the end of 2017.
"I was reading up on toxic foods when I saw them on the list: kidney beans."
https://www.statefoodsafety.com/Resourc ... oxic-beans
Hint: Don't eat Cd.
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz