Interface Dimensions

356 Porsche-related discussions and questions.
Post Reply
Message
Author
User avatar
Albert Tiedemann
356 Fan
Posts: 1229
Joined: Thu Apr 03, 2008 2:46 pm

Interface Dimensions

#1 Post by Albert Tiedemann »

356 Engine-Transmission Interface.pdf
(340.15 KiB) Downloaded 48 times
All:

In 2007 I repaired a transmission whose lower mounting holes had been "broached out" on a severe taper by the engine mounting stud's threads likely resulting from repeated engine removals in haste and/or without care. I cannot find the file or notes of these needed dimensions which are shown on the attachment. I am replicating a portion of a Factory tool for which this data is required. I have found many transmission/engine patterns on line for many combinations of "big iron". These drawings appear to be the "real" drawings from the different manufacturers. I do remember seeing the pattern asked for in this topic in a VW brochure, but cannot find any of that stuff now.

I would appreciate a link to a site where I can find this information. Metric dimensions okay.
Albert Tiedemann, C356C
"The Hermit"

Post Reply